Characterization of Through-Hole Filling by Copper Electroplating Using a Tetrazolium Salt Inhibitor
Year: 2013
Type: article
Abstract: Through-hole (TH) filling of an advanced printed circuit board (PCB) by copper electroplating is performed using a direct current (DC) plating method and a simple copper plating formula composed of a single organic additive, namely, nitrotetrazolium blue chloride monohydrate (NTBC). Copper is preferentially deposited at the hole center to form a butterfly-shaped copper cross-section in the filled TH during plating. Three key factors are identified for enhancing the filling performance via a center protrusion deposition in the TH and are characterized by practical filling plating results and cyclic voltammetry (CV) analyzes. The filling performance of the copper plating formula for the TH is sensitive to forced convection, chloride ion concentrations and H 2 SO 4 concentrations. An appropriate forced convection combined with weak accelerators [3-(Benzothiazolyl-2-mercapto)-propylsulfonic acid, sodium salt (ZPS) or 3-S-Isothiuronium propyl sulfonate (UPS)] pre-adsorbed on the copper seed layer of the TH can effectively shorten the fill plating time from 9 h to 5 h. The center-protrusion filling mechanism and the role of NTBC in the TH filling are discussed in this work based on the plating results and electrochemical analyzes.
DOI: 10.1149/2.005312jes
Institution: National Chung Hsing University
Language: English
Subfield: Surfaces, Coatings and Films
Field: Materials Science
Domain: Physical Sciences
Open Access status: bronze
Funder: National Science Council
Award: G1044754668
OpenAlex ID: W2019851364
