Work

Vibration piezoelectric energy harvester with multi-beam

Year: 2015

Type: article

Abstract: This work presents a novel vibration piezoelectric energy harvester, which is a micro piezoelectric cantilever with multi-beam. The characteristics of the PZT (Pb(Zr0.53Ti0.47)O3) thin film were measured; XRD (X-ray diffraction) pattern and AFM (Atomic Force Microscope) image of the PZT thin film were measured, and show that the PZT (Pb(Zr0.53Ti0.47)O3) thin film is highly (110) crystal oriented; the leakage current is maintained in nA magnitude, the residual polarisation Pr is 37.037 μC/cm2, the coercive field voltage Ec is 27.083 kV/cm, and the piezoelectric constant d33 is 28 pC/N. In order to test the dynamic performance of the energy harvester, a new measuring system was set up. The maximum output voltage of the single beam of the multi-beam can achieve 80.78 mV under an acceleration of 1 g at 260 Hz of frequency; the maximum output voltage of the single beam of the multi-beam is almost 20 mV at 1400 Hz frequency.

Source: AIP Advances

DOI: 10.1063/1.4919049

Authors: Yan Cui, Qunying Zhang, Minglei Yao, Weijie Dong, Shiqiao Gao

Institutions: Dalian University of Technology, Beijing Institute of Technology, State Key Laboratory of Explosion Science and Safety Protection

Language: English

Topic: Innovative Energy Harvesting Technologies

Subfield: Mechanical Engineering

Field: Engineering

Domain: Physical Sciences

SDG: Affordable and clean energy

Open Access status: gold

Estimated APC paid: $1,350