Temperature Distributions in Welding Specimens for Ultrasonic Plastic Welding Systems Using Various Frequencies
Year: 2005
Type: article
Abstract: Welding characteristics and temperature increases of plastic welding parts over a frequency range of 27 kHz to 94 kHz are studied. Using 27 kHz, 40 kHz, 67 kHz and 94 kHz ultrasonic plastic welding systems, temperature increase at welded surfaces of 1.0-mm-thick polypropylene plates and polymethyl methacrylate plates is measured using thermocouples inserted between plates, and temperature distributions at cross-sections of lapped plate specimens are measured using a thermotracer. The 94 kHz vibration system used for ultrasonic plastic welding consists of a bolt-clamped Langevin type longitudinal vibration source using four 30-mm-diameter piezoelectric ceramic (PZT) rings, a stepped horn (vibration velocity transform ratio N=3.0) and a catenoidal horn (N=3.13) with an 8-mm-diameter welding tip. The other vibration systems have similar configurations. Using a higher frequency system, increases in temperature measured at the welding parts are higher. The maximum temperature increase measured using thermocouples and a thermotracer was over 330°C.
DOI: 10.1143/jjap.44.4653
Institution: Kanagawa University
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W2090728643