Work

Deep oil possibilities of the Illinois basin

Year: 1964
Type: article
Abstract: The Middle Ordovician and younger rocks of the Illinois Basin, which have yielded 3 billion barrels of oil, are underlain by a larger volume of virtually untested Lower Ordovician and Cambrian rocks.Within the region that has supplied 99 percent of the oil, where the top of the Middle Ordovician (Trenton) is more than 1,000 feet below sea level, less than 8 inches of hole have been drilled per cubic mile of the older rocks.Even this drilling has been near the edges; and in the central area, which has yielded five-sixths of the oil, only one inch of test hole has been drilled per cubic mile of Lower Ordovician and Cambrian.Yet drilling depths are not excessive, ranging from 6,000 to 14,000 feet to the Precambrian.More production may be found in the Middle Ordovician Galena Limestone (Trenton), thus extending the present productive regions.In addition, new production may be found in narrow, dolomitized fracture zones in the tight limestone facies on the north flank of the basin .The underlying Platteville Limestone is finer grained and offers fewer possibilities.The Joachim Dolomite oil-shows occur in tight sandstone bodies that should have commercial porosity in some regions.The dark, fetid Dutchtown Limestone in the southern part of the basin has similar sandstone lenses.At the base of the Middle Ordovician, the St.Peter Sandstone and the underlying Everton Group have much porous rock, but the best possibilities are in the eastern part of the basin, where the St.Peter breaks up into isolated sand bodies.The Lower Ordovician and Cambrian Knox Dolomite Megagroup (Arbuckle, Ellenburger) is a prolific producer in regions where the production is in part related to the sub-Tippecanoe unconformity, which truncates the Knox.Lenticular sandstones, derived from the north, extend into the basin at several levels.Zones of porous dolomite are present, particularly in the Shakopee Dolomite at the top of the megagroup and in the Potosi (Trempealeau) Dolomite in the Cambrian part of the megagroup.The Eau Claire Formation, beneath the Knox, is essentially sandstone north of the deep part of the basin, dolomite with some oolitic limestone to the west, and shale to the east.The area in the deep part of the basin where these three rock types interfinger is the most favorable area for deep oil production.Although the Mt.Simon Sandstone at the base of the column is the thickest fluid -yielding unit in the region, it appears to offer fewer production possibilities than other units.The deep part of the Illinois Basin is promising, because it contains a large volume of untested, unmetamorphosed, near-shore, marine sediments that are saturated with medium to high salinity brine Its nearness to markets, transportation, and service facilities offer advantages in comparison with geologically comparable but geograph- ically remote prospects.1
Language: English
Subfield: Geology
Open Access status: green
OpenAlex ID: W2583030554
FWCI: 1.185
Cites: 15
Cited by: 19
Related to: 10