Work

Admicellar-polymerized thin elastomeric coatings for engineered interfaces for enhanced composite performance

Year: 2003
Type: dissertation
Abstract: A surface-polymerization technique known as admicellar polymerization has been evaluated as an alternative method to tailor the interfacial properties of glass/epoxy composite parts molded by resin transfer molding (RTM). Initially, small-scale polymerization reactions were carried out to investigate the feasibility of covering glass fibers with a thin elastomeric film that would render them fairly hydrophobic. After the treatment, the admicellar-modified fibers not only exhibited a chemically heterogeneous surface with high contact angles with water (thetaa = 72 +/- 8); but also had statistically identical wetting characteristics to fibers coated with commercial sizings when probed with an epoxy resin (Epon 815C). In subsequent experiments, random-mat glass fibers modified with the same technique described above were used as the reinforcement for RTM-parts molded in a high-speed setup. These disk-shaped parts were mechanically tested, both under dry and wet conditions, to study the enhancement in structural integrity achieved with the insertion of controlled-thickness elastomeric interphases. It is worth noting that RTM composites containing woven fabrics coated with poly (styrene-co-isoprene), at different coverage levels, gave a similar dry-adhesion performance trend as the random-mat reinforcement. Firstly, tensile properties augmented in more than 50% for all cases; whereas, the interlaminar shear strength (ILSS) increased proportionally with the amount of elastomeric film present. For this particular admicellar sizing the ILSS level was only 9% lower than that observed with a silane-based commercial sizing, which signals the potential of admicellar sizings as alternative coatings for glass fiber reinforcements with comparatively similar performance as the proprietary organosilane treatments.
Language: English
Open Access status: green
OpenAlex ID: W2991836616
Cites: 14
Cited by:
Related to: 10