Work

Circulating Current Control for Modular Multilevel Converters With (N+1) Selective Harmonic Elimination—PWM

Year: 2020

Type: article

Abstract: Modular multilevel converters (MMCs) require control of the circulating current, icirc, to improve their operation and efficiency. This is particularly important when low switching frequency modulation techniques, such as selective harmonic elimination pulse width modulation (SHE-PWM) are applied. This article provides a novel method to control the circulating current along with (N+1) SHE-PWM. Unlike the case of (2N+1) SHE-PWM, explicit redundant levels are not available and, therefore, different modulation indexes, m1and m2, are employed in the upper and lower arms to obtain the desired modulation index ma. Unlike previous (N+1) circulating current methods, the distances between ma, m1, and m2remain constant to not disturb the phase output voltage, with an interchange of m1and m2between the arms used to follow the desired icirc. The control adjusts the dc component of the circulating current and the energy stored in the SMs to their references, while maintaining the energy balance between the upper and lower arms. Simulation tests and experimental results, obtained from a single-phase laboratory prototype MMC, validate the proposed control technique.

Source: IEEE Transactions on Power Electronics

DOI: 10.1109/tpel.2020.2964522