Year: 2019
Type: conference-paper
Abstract: The modern quality management system in production is based on the control of risks of non-compliance with quality requirements [1, p. 41].Pores are a common defect in welds.The appearance of pores can disrupt the functionality of products, lead to man-made disasters, human casualties.To reduce the risks of porosity of welds, coordinated actions of managers, designers, technologists, quality inspectors are required.The reduction of porosity risks can be achieved by optimizing the applied welding methods, the parameters of the welding modes, the welding materials used and their preparation for welding, methods for controlling the porosity and sample control volumes.Unreasonably large volumes of control lead to additional costs, and too small volumes of selective control increase the risk of transferring into operation products with unacceptable porosity of welds.Thus, by optimizing sampling volumes, the risks of weld porosity can be reduced with minimal technical control costs.Hydrogen is the main cause of porosity of welds.The moisture of welding materials is the main source of hydrogen in the weld metal.We have developed a method for determining the resistance of welds to pore formation [2, p. 38].This technique allows you to experimentally determine the probability of exceeding the permissible porosity of the welds.Risks for exceeding the permissible porosity of welds can be assessed using the Potential Failure Mode and Effect Analysis technique (FMEA) [3, p. 24].The risk of non-compliance with a quality requirement is determined by three factors: the probability of non-compliance, the consequences of such non-compliance and the possibility of timely detection of non-compliance or its cause.Quantitative data on the probability of exceeding the permissible porosity of the welds, combined with an understanding of the consequences of exceeding the permissible porosity and an acceptable level of risk, allow us to calculate the minimum required volumes of selective control of the porosity of the welds [4, p. 5].
Author: Volodymyr Haievskyi
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W3000503602
