Evolution of Microstructure and Properties of ZYK530 Magnesium Alloy during Extrusion-Forging compound Forming
Year: 2020
Type: conference-paper
Abstract: The evolution of microsturcture and mechanical properties of ZYK530 Magnesium alloy during extrusion and die forging compound forming process were studied and analyzed. The results show that the as-cast ZYK530 alloy mainly consists of a-Mg matrix and I-Mg3Zn6Y and a small amount of W-Mg3Y2Zn3 and Mg2Zn3 phases. During extrusion to die forging forming, the grain size of as-cast ZYK530 Magnesium alloy is refined and uniform under the action of three-dimensional compressive stress and high temperature deformation. The I-Mg3Zn6Y phase of ZYK530 magnesium alloy decrease relatively, while the distribution of W-Mg3Y2Zn3 is more obvious, a small amount of Z-Mg12ZnY and Mg-Zn phases and undetermined phases can be observed in the matrix. Tensile test results show that the tensile strength, yield strength and elongation of extruded preformed specimens are increase by 32.6%, 18% and 18% respectively compared with as-cast specimens. The mechanical properties of final forged specimens are improved by 9%, 38.6% and 23% respectively compared with those of extruded preformed specimens. The fracture mechanism changes form as-cast cleavage fracture to mixed fracture mechanism of toughness and brittleness.
Authors: Fenghong Cao, Chang Chen, Yaohui Xu
Institution: Leshan Normal University
Language: English
Subfield: Biomaterials
Field: Materials Science
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W3000672369