Rotary friction welded C45 to 16NiCr6 steel rods: statistical optimization coupled to mechanical and microstructure approaches
Year: 2021
Type: article
Abstract: This work represents the production of dissimilar friction welded joints between C45 carbon steel and nickel-chromium alloy steel 16NiCr6. Central Composite Response Surface (RSM) methodology, optical microscopy, scanning electron microscopy (SEM), backscattered electron diffraction (EBSD) and bending test were performed for this study. Physicochemical characterization was used to reveal the welded joint microstructures. The bending test was done in order to measure the ultimate bending strength (UBS). As a conclusion, regarding the optimization of the parameters, friction time and the rotation speed were the most effective parameters on the joint strength. These parameters revealed that the maximum bending strength of 1406.892 MPa can be obtained at a rotational speed of 2000 rpm, a friction pressure of 24.77 MPa and a friction time of 13 seconds. On the weld samples it was also noted that the particle size decreases significantly as the units of the parameters increase, which led to note that the optimization of these parameters converges towards an average particle size, where were found a good accommodation between hardness and young’s modulus.
Institutions: University of Sciences and Technology Houari Boumediene, Centre National de la Recherche Scientifique, Université de Pau et des Pays de l'Adour, Institut des Sciences Analytiques et de Physico-Chimie pour l'Environnement et les Matériaux, Slovak Academy of Sciences, Institute of Materials Research of the Slovak Academy of Sciences, Research Center in Industrial Technologies
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W3175580098
