Response Surface Methodology for Boron Removal by Donnan Dialysis: Doehlert Experimental Design
Year: 2021
Type: article
Abstract: The removal of boron by Donnan dialysis from aqueous solutions has been studied according to response surface methodology (RSM). First, a preliminary study was performed with two membranes (AFN and ACS) in order to determine the experimental field based on different parameters, such as the pH of the feed compartment, the concentration of counter-ions in the receiver compartment, and the concentration of boron in the feed compartment. The best removal rate of boron was 75% with the AFN membrane, but only 48% with the ACS membrane. Then, a full-factor design was developed to determine the influence of these parameters and their interactions on the removal of boron by Donnan dialysis. The pH of the feed compartment was found to be the most important parameter. The RSM was applied according to the Doehlert model to determine the optimum conditions ([B] = 66 mg/L, pH = 11.6 and [Cl−] = 0.5 mol/L) leading to 88.8% of boron removal with an AFN membrane. The use of the RSM can be considered a good solution to determine the optimum condition for 13.8% compared to the traditional “one-at-a-time” method.
Source: Membranes
Authors: Ikhlass Marzouk Trifi(Conceptualization, Formal analysis, Methodology, Writing – original draft, Writing – review & editing), Lobna Chaabane(Methodology, Writing – original draft), Lasâad Dammak(Writing – original draft, Writing – review & editing), Lassaad Baklouti(Formal analysis, Writing – review & editing), Béchir Hamrouni(Writing – review & editing)
Language: English
Subfield: Filtration and Separation
Field: Chemical Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,944
OpenAlex ID: W3204597583
