Effect of spark plasma sintering and reinforcements on the formation of ultra-fine and nanograins in AA2024-TiB2-Y hybrid composites
Year: 2021
Type: article
Abstract: This study reports the influence of sintering mechanism and reinforcement materials on the formation of ultra-fine and nanograins in Al-TiB 2 -Y nanohybrid composites. The mechanical properties of the composites and their corresponding micro and nanostructures are correlated. The experimental and characterization results revealed that despite the addition of TiB 2 , the hard and brittle Al 3 Ti phase formation in the composites was suppressed and hence, their ductility was retained. It was found that yttrium content of 0.3 wt% was the optimum amount which created advantageous spark plasma sintering conditions, and the addition of 0.3 wt% promoted the formation of bi-modal size grains (ultra-fine and nano) along with micro grains, Ω and other nano precipitates, resulting in a significant enhancement in the composite properties. The formation of ultra-fine and nanograins may be attributed to the combined effect of melting and rapid solidification at necking zones due to Joule's heating and thermo-mechanical fatigue. Among all the sintered composites, the highest hardness (137 HV), ultimate tensile strength (UTS) (496 MPa), yield strength (YS) (438 MPa) with 15.7% elongation were obtained in the sintered sample reinforced with 1.0 wt% TiB 2 and 0.3 wt% yttrium.
Authors: CH. Suresh Vidyasagar, D.B. Karunakar
Institution: Indian Institute of Technology Roorkee
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $2,790
OpenAlex ID: W4200020522
