Year: 2021
Type: article
Abstract: a reconfigurable antenna design for 5G applications is presented. It is based on monopole antenna and fractal structure. The design structure is consisted of (monopole) feedline, ground plane, L-shape reflector, fractal structure and PIN diodes. The antenna is printed on (25×29×1.6 mm3) FR-4 substrate of εr=4.3 and tanδ =0.001. The antenna shows a resonant frequency at 4.1 GHz with S11=-11.4 dB and Omni-direction pattern of 1.21 dB gain. The L-shaped reflector is used to maintain the radiation pattern in a specific direction. Moreover, the proposed fractal structure is found to operate as a circuit to give another resonant frequency and enhance the antenna performance. Where it is used to give more manipulation in the antenna performance including: frequency resonance and radiation patterns. The PIN-diodes are used to give many cases for more current manipulation. moreover, the authors used RF (50 SMA port) between monopole antenna and right side of ground plane to optimize directing radiation pattern and to eliminate the problems of interference between AC and DC current that produced from using PIN diode. This manipulation leads to change the resonant frequency and radiation pattern to the desired direction.So all parts are printed on a single side of FR4 substrate
Authors: Amna S. Kamel, Ali S. Jalal
Institution: Nahrain University
Language: English
Topic: Antenna Design and Analysis
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W4200328545