Research of Drop Formation during Electric Arc Surfacing with the Use of Mechanical Control Impacts on the Electrode
Year: 2022
Type: article
Abstract: Investigations of the influence of the parameters of mechanical effects on the temperature and mass of electrode metal droplets during electric arc surfacing with electrode materials of various chemical composition and type have been carried out. The main regularities of the process of droplet transfer during melting of a strip electrode with the introduction of control mechanical impacts have been established. The optimal range of the oscillation frequency of the strip electrode end is 40 ÷ 80 Hz, in which the average droplet diameter decreases to 1.3 ÷ 1.5 mm, and the mass to 0.08 ÷ 0.1 g. As a result of the research, it was found that, during electric arc surfacing with a strip electrode, changing the parameters of mechanical control impacts on the strip end allows not only to control the drop transfer frequency, but also to reduce the size and temperature of the electrode metal droplets, ensuring a decrease in heat input into the base metal and the formation of a favorable structure of the deposited weld metal.
Source: Materials science forum
DOI: 10.4028/p-x9f4w0
Authors: Elena Lavrova, Vitaliy Ivanov, Dmitry Il'yashchenko
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
OpenAlex ID: W4283079283