Work

Crystal Growth Promotion and Defect Passivation by Hydrothermal and Selenized Deposition for Substrate-Structured Antimony Selenosulfide Solar Cells

Year: 2022

Type: article

Abstract: Antimony sulfide-selenide (Sb 2 (S,Se) 3 ) is a promising light-harvesting material for stable and high-efficiency thin-film photovoltaics (PV) because of its excellent light-harvesting capability, abundant elemental storage, and excellent stability. This study aimed to expand the application of Sb 2 (S,Se) 3 solar cells with a substrate structure as a flexible or tandem device. The use of a hydrothermal method accompanied by a postselenization process for the deposition of Sb 2 (S,Se) 3 film based on the solar cell substrate structure was first demonstrated. The mechanism of postselenization treatment on crystal growth promotion of the Sb 2 (S,Se) 3 film and the defect passivation of the Sb 2 (S,Se) 3 solar cell were revealed through different characterization methods. The crystallinity and the carrier transport property of the Sb 2 (S,Se) 3 film improved, and both the interface defect density of the Sb 2 (S,Se) 3 /CdS interface and the bulk defect density of the Sb 2 (S,Se) 3 absorber decreased. Through these above-mentioned processes, the transport and collection of electronics can be improved, and the defect recombination loss can be reduced. By using postselenization treatment to optimize the absorber layer, Sb 2 (S,Se) 3 solar cells with the configuration SLG/Mo/Sb 2 (S,Se) 3 /CdS/ITO/Ag achieved an efficiency of 4.05%. This work can provide valuable information for the further development and improvement of Sb 2 (S,Se) 3 solar cells.

Source: ACS Applied Materials & Interfaces

DOI: 10.1021/acsami.2c06805