End-to-End Deep Neural Network Based Nonlinear Model Predictive Control: Experimental Implementation on Diesel Engine Emission Control
Year: 2022
Type: article
Abstract: In this paper, a deep neural network (DNN)-based nonlinear model predictive controller (NMPC) is demonstrated using real-time experimental implementation. First, the emissions and performance of a 4.5-liter 4-cylinder Cummins diesel engine are modeled using a DNN model with seven hidden layers and 24,148 learnable parameters created by stacking six Fully Connected layers with one long-short term memory (LSTM) layer. This model is then implemented as the plant model in an NMPC. For real-time implementation of the LSTM-NMPC, an open-source package acados with the quadratic programming solver HPIPM (High-Performance Interior-Point Method) is employed. This helps LSTM-NMPC run in real time with an average turnaround time of 62.3 milliseconds. For real-time controller prototyping, a dSPACE MicroAutoBox II rapid prototyping system is used. A Field-Programmable Gate Array is employed to calculate the in-cylinder pressure-based combustion metrics online in real time. The developed controller was tested for both step and smooth load reference changes, which showed accurate tracking performance while enforcing all input and output constraints. To assess the robustness of the controller to data outside the training region, the engine speed is varied from 1200 rpm to 1800 rpm. The experimental results illustrate accurate tracking and disturbance rejection for the out-of-training data region. At 5 bar indicated mean effective pressure and a speed of 1200 rpm, the comparison between the Cummins production controller and the proposed LSTM-NMPC showed a 7.9% fuel consumption reduction, while also decreasing both nitrogen oxides (NOx) and Particle Matter (PM) by up to 18.9% and 40.8%.
Source: Energies
DOI: 10.3390/en15249335
Authors: David C. Gordon(Conceptualization, Formal analysis, Software, Visualization, Writing – original draft, Writing – review & editing), Armin Norouzi(Conceptualization, Formal analysis, Methodology, Software, Visualization, Writing – original draft, Writing – review & editing), Alexander Winkler(Conceptualization, Software, Writing – review & editing), Jakub McNally(Software, Writing – review & editing), Eugen Nuss(Methodology, Writing – review & editing), Dirk Abel(Resources, Supervision, Writing – review & editing), Mahdi Shahbakhti(Resources, Supervision, Writing – review & editing), Jakob Andert(Funding acquisition, Project administration, Resources, Supervision, Writing – review & editing), Charles R. Koch(Funding acquisition, Project administration, Resources, Supervision, Writing – review & editing)
Institutions: University of Alberta, RWTH Aachen University
Language: English
Subfield: Control and Systems Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,303
Awards: G2413396044, G471143748
OpenAlex ID: W4311978990
