From lithium to potassium: Comparison of cations in poly(ethylene oxide)-based block copolymer electrolytes for solid-state alkali metal batteries
Year: 2023
Type: article
Abstract: Liquid electrolytes (LEs) commonly show severe side reactions at the electrode-electrolyte interface, especially with alkali metal anodes, leading to rapid capacity fade of metal-ion batteries. Solid polymer electrolytes (SPEs), however, contribute to the suppression of side reactions due to their inherent inertness and high mechanical strength, providing long-term stable battery operation. Herein, we investigated physical and electrochemical properties of SPEs based on our previously reported microphase-separated poly(vinyl benzyl methoxy poly(ethylene oxide) ether)-block-polystyrene block copolymer (PVBmPEO-b-PS) with different alkali metal ions (A+ = Li+, Na+ or K+) and their use in the respective metal batteries, showing the potential for the transition from lithium to post-lithium batteries. Rheological and thermal properties as well as ion transport in the SPEs with different bis(trifluoromethanesulfonyl)imide (TFSI) salts concentrations revealed similar shear storage moduli (G’) for the investigated SPEs, while the lowest glass transition temperatures (Tg) were found for KTFSI-based films. By contrast, the highest total ionic conductivity was found for the LiTFSI-based SPEs. To quantify the A+ transference numbers (TA+), the Bruce-Vincent method and pulsed-field gradient (PFG) NMR were conducted, revealing significant challenges for TA+ determination of post-Li systems. Further, the examination of the interfacial stability of SPE/A interfaces by conducting plating/stripping experiments revealed significantly higher resistances for sodium- and potassium-based systems in comparison to their lithium-based counterpart. Nonetheless, A-metal/SPE/cathode cells with PVBmPEO-b-PS-based Na- and K-SPEs with the Prussian Blue analogues (PBAs, Na2-xFe[Fe(CN)6] and K2-xFe[Fe(CN)6]) positive electrodes and the respective alkali metal negative electrodes enabled cycling at elevated temperature of 55 °C. Herein, both sodium and potassium metal batteries exhibited stable cycling with capacity retentions of 73% over 100 cycles for the Na-cell, and 94% over the same cycle number for the K-cell, (and a high coulombic efficiency (CE) of 98% at the 100th cycle).
Source: Electrochimica Acta
Institution: Karlsruhe Institute of Technology
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Keywords: solid polymer electrolytes, alkali metal batteries, sodium metal batteries, potassium metal batteries, post-lithium batteries, cation transference number, Prussian blue analogues, electrode-electrolyte interface stability, ionic conductivity, glass transition temperature, high-temperature cycling
Open Access status: hybrid
Estimated APC paid: $3,699
OpenAlex ID: W4366000258
