Work

Microstructures and Phases in Electron Beam Additively Manufactured Ti-Al-Mo-Z-V/CuAl9Mn2 Alloy

Year: 2023

Type: article

Abstract: Electron beam additive manufacturing from dissimilar metal wires was used to intermix 5, 10 and 15 vol.% of Ti-Al-Mo-Z-V titanium alloy with CuAl9Mn2 bronze on a stainless steel substrate. The resulting alloys were subjected to investigations into their microstructural, phase and mechanical characteristics. It was shown that different microstructures were formed in an alloy containing 5 vol.% titanium alloy, as well as others containing 10 and 15 vol.%. The first was characterized by structural components such as solid solution, eutectic intermetallic compound TiCu2Al and coarse grains of γ1-Al4Cu9. It had enhanced strength and demonstrated steady oxidation wear in sliding tests. The other two alloys also contained large flower-like Ti(Cu,Al)2 dendrites that appeared due to the thermal decomposition of γ1-Al4Cu9. This structural transformation resulted in catastrophic embrittlement of the composite and changing of wear mechanism from oxidative to abrasive.

Source: Materials

DOI: 10.3390/ma16124279