Work

Eficiência Do Preenchimento De Alvéolos Na Melhoria Da Capacidade Ao Cisalhamento De Lajes Alveolares Protendidas

Year: 2023
Type: article
Abstract: RESUMO: As lajes alveolares correspondem a um dos mais avançados tipos de unidades pré-moldadas. Seu emprego na construção civil representa um razoável progresso em termos construtivos, permitindo a racionalização e o aperfeiçoamento técnico das obras. Com o intuito de melhorar a resistência ao cisalhamento das lajes alveolares protendidas é comum o preenchimento dos alvéolos na região de sua extremidade. Entretanto, isso corresponde a uma atividade complexa, não existe uma técnica padronizada que viabilize um adequado preenchimento, e quando deficiente impede o trabalho da seção como composta, afetando o ganho de resistência considerado em projeto. Este artigo apresenta um estudo da eficiência dos preenchimentos de alvéolos quanto a melhoria da resistência ao cisalhamento de lajes alveolares protendidas com 200 mm de altura. Para isso, foram realizados 23 ensaios com o emprego de dois tipos de concreto para o preenchimento: concreto simples e concreto reforçado com fibras (SFRC). Além disso, foram analisadas lajes com dois e quatro alvéolos preenchidos. Os valores teóricos foram determinados de acordo com as recomendações da NBR 14861:2022. A partir deste estudo, foi possível observar que o preenchimento de dois alvéolos com SFRC garantiu um aumento de 46% da resistência ao cisalhamento quando comparado com peças sem qualquer preenchimento. Assim, constatou-se que maior número de preenchimento não garante um acréscimo de resistência proporcional ao aumento da área de concreto. ABSTRACT: Hollow core slabs correspond to one of the most advanced precast unit types. Its use in civil construction represents a reasonable progress in constructive terms, allowing the rationalization and technical improvement of the works. To ensure some improvement of the shear strength of prestressed hollow core slabs it is common to fill the cores in the slab end region. However, this corresponds to a complex activity, there is no standardized technique that enables an adequate filling, and when deficient, it prevents the work of section as composite, affecting the improvement of strength considered in the design. This article presents a study of the efficiency of the filled cores with related to the improvement of the shear capacity considering hollow core slabs with 200 mm height. So, an experimental study was carried out with the use of two types of concrete: plain concrete and fiber reinforced concrete (SFRC). Furthermore, slabs with two and four filled cores were analyzed. the theoretical values were determined according to NBR 14861:2022. From this study, it was possible to observe that the filling of two cores with SFRC improved the shear strength by 46% when compared with slabs without fillings. Thus, it was found that a greater number of filled cores was not guarantee an increase of strength proportional to the increase of the concrete area.
Language: Portuguese
Open Access status: diamond
OpenAlex ID: W4381925269
FWCI:
Cites: 1
Cited by:
Related to: 10