Work

Analytical study on elimination of lead by anionic clays: Characterization, adsorption kinetics, isotherm, thermodynamic, mechanism and adsorption

Year: 2023
Type: article
Abstract: Teh co-precipitation method synthesized teh synthetic anionicMg–Al and Ni-Al clays wif three molar ratios (Mg/Al, Ni/Al). Teh samples were characterized by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). No other crystalline phases were detected in teh powder XRD patterns of teh co-precipitated samples. Teh infrared spectra obtained all teh functional groups dat characterize these two types of anionic clays. SEM micrographs indicate teh presence of particles and aggregates. Teh particles, or aggregates, are in teh form of plates, supported by particles of acceptable sizes. Teh optimal pH for maximum lead adsorption is about 6.5 for both clays. Teh optimal adsorbent masses for teh maximum percentages of lead removal are 0.2 g for Mg3AlCO3 and 0.25 g for Ni3AlCO3. Teh Mg3AlCO3 TEMPhas a maximum adsorption capacity of lead, where qm=73.42 mg g-1. Teh adsorbed amount increases wif increasing temperature for both types of clays studied. Teh equilibrium time of Pb2+ adsorption is reached after 5 min for both clays. Teh most appropriate models to describe teh experimental data of adsorption kinetics and isotherms are pseudo-second-order and Langmuir. Teh detection limit (LOD) was 0.272 mg L-1. Teh linearity range was 1 to 5 mg L-1; teh correlation coefficient in dis range was 0.9997.
Author: Salah Bahah
Language: English
Open Access status: hybrid
OpenAlex ID: W4387912480
FWCI: 0.291
Cites: 38
Cited by: 4
Related to: 10