Complete Prevention of Bubbles in a PDMS-Based Digital PCR Chip with a Multifunction Cavity
Year: 2024
Type: article
Abstract: In a chamber-based digital PCR (dPCR) chip fabricated with polydimethylsiloxane (PDMS), bubble generation in the chambers at high temperatures is a critical issue. Here, we found that the main reason for bubble formation in PDMS chips is the too-high saturated vapor pressure of water at an elevated temperature. The bubbles should be completely prevented by reducing the initial pressure of the system to under 13.6 kPa to eliminate the effects of increased-pressure water vapor. Then, a cavity was designed and fabricated above the PCR reaction layer, and Parylene C was used as a shell covering the chip. The cavity was used for the negative generator in sample loading, PDMS degassing, PCR solution degassing in the digitization process and water storage in the thermal reaction process. The analysis was confirmed and finally achieved a desirable bubble-free, fast-digitization, valve-free and no-tubing connection dPCR.
Source: Biosensors
DOI: 10.3390/bios14030114
Authors: Shiyuan Gao(Formal analysis, Investigation, Validation, Writing – original draft), Tiegang Xu(Conceptualization, Methodology, Supervision, Writing – review & editing), Lei Wu(Conceptualization, Investigation, Methodology, Writing – review & editing), Xiaoyue Zhu(Data curation, Methodology, Writing – review & editing), Xuefeng Wang(Formal analysis, Software, Validation), Ying Chen(Data curation, Methodology, Validation), Gang Li(Methodology, Resources, Supervision), Xinxin Li(Conceptualization, Funding acquisition, Project administration)
Language: English
Subfield: Biomedical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,069
OpenAlex ID: W4392090959
