Utilization of Fly Ash and Bottom Ash as a Mixture for Making Paving Blocks
Year: 2024
Type: conference-paper
Abstract: PLTU Tanjung Jati-B Jepara produces waste from coal combustion in the form of fly ash and bottom ash. The accumulation of waste will cause many other problems, so innovation is needed to turn it into value-added materials. One of them is to make fly ash and bottom ash into a mixture for making paving blocks. In making paving blocks with fly ash and bottom ash materials will use a mixture of materials 1: 3 and 6 mix designs. The results showed that the use of fly ash and bottom ash can produce quality B paving blocks with compressive strength values of 18.73 MPa in mix design (1 S: 3 BA) and quality C paving blocks with 7.5% water absorption in mix design and ((0.5 S : 0.5 FA): 3 BA). From these results, it can be concluded that every addition to the percentage of fly ash will reduce the compressive strength value and reduce the water absorption of the paving block. While the use of bottom ash as a substitute for sand will reduce the compressive strength value but add water absorption of paving blocks.
Authors: Endah Kanti Pangestuti, Eko Nugroho Julianto, Rahma Nindya Ayu Hapsari, Farhan Sholahudin, Nur Aida, Debri Ardiasnyah, Praba Bagaskara, Fadhila Rizqina Heriyanto
Institution: State University of Semarang
Language: English
Subfield: Building and Construction
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W4402000729
