Work

Residual Stress Effect on Crack Closure in Additively Manufactured Stainless Steels

Year: 2024
Type: article
Abstract: Super duplex stainless steels (SDSS) are extensively used in oil and gas, marine, and chemical process industries. Recently, wire-arc additive manufacturing (WAAM) has been demonstrated as an attractive method for fabricating near net-shape structural components from SDSS. This manufacturing technique can introduce a complex residual stress field, which could significantly influence the fatigue lifetimes of the manufactured parts. Moreover, residual stresses can affect the evaluation of fatigue properties by changing the effective stress ratio. This study investigates the effect of residual stresses on crack tip closure values at different stress ratios. For this purpose, CT specimens were fabricated from the printed plate and starter notches were machined in the specimens either parallel or perpendicular to the weld deposition directions. No heat treatment was applied to the machined specimens. The crack growth rates, crack closure loads, and residual back face strain were evaluated experimentally in the Paris regime of long crack growth. The open crack compliance method is used to estimate the contributions of the residual stress field to the crack tip closure values and the effective stress intensity factor range. It was demonstrated that accounting for the residual stresses leads to a notable reduction in the scatter of experimental results. In general, the current work contributes to the development of testing procedures for the evaluation of intrinsic fatigue properties, i.e. material properties, which are not affected by the loading history and the presence of residual stress field.
Language: English
Open Access status: diamond
OpenAlex ID: W4405962368
FWCI: 0.597
Cites: 22
Cited by: 5
Related to: 10