Work

Monolayer MoS2 as a Window Material for High-Resolution Liquid-Phase Electron Microscopy and Spectroscopy

Year: 2025
Type: article
Abstract: Liquid-phase electron microscopy enables direct imaging and real-time investigation of physical, chemical, and biological processes in their native liquid environments, offering new insights into dynamic material transformations at the nanoscale. Traditional silicon nitride liquid cells (LCs) suffer from thick windows, excessive liquid layers, and electron beam-induced radiolysis, limiting resolution. The realization of graphene liquid cells (GLCs) a decade ago mitigated these challenges by encapsulating liquid between two graphene layers, forming ultrathin, stable pockets that sustain high vacuum conditions, enabling the study of dynamics processes in liquid phase [1,2]. This advancement significantly improved imaging and spectroscopy capabilities, particularly by enabling high-resolution studies with controlled electron dose rates [3,4]. Further developments introduced hexagonal boron nitride liquid cells (BNLCs), which enhance low-energy electron energy-loss spectroscopy (EELS) and enable vibrational spectroscopy [5]. However, challenges such as beam-induced damage and bubble formation persist, necessitating alternative window materials. Recently, molybdenum disulfide (MoS2) has emerged as a promising candidate as a window material due to its tunable optical and electronic properties, as well as superior physiochemical stability [6]. In this study, we explore the feasibility of pure monolayer MoS2 liquid cells (MLCs) and hybrid MoS2-graphene liquid cells (MGLCs) for high-resolution electron microscopy and spectroscopy, providing a potential platform for in situ investigations of electrochemical reactions at atomic resolution. The MoS2 liquid cells were fabricated using a polymer- and etching-free transfer process, ensuring minimal contamination. Monolayer MoS2 on SiO2/Si substrate was delaminated into water [7]. This method enabled us to transfer freestanding MoS2 onto TEM grids with high yield, large-area coverage, and minimal wrinkles—overcoming challenges associated with graphene-based liquid cells. Liquid pockets were formed by drop-casting the desired solution onto the MoS2-coated TEM grid, followed by encapsulation with either a second MoS2 monolayer or a graphene layer using the perfect loop or touchdown method, resulting in stable MGLCs and MLCs as illustrated in Figure 1(a, b). To assess their stability and encapsulation capability, ferritin with an iron core (Sigma Aldrich, Prod. # F4503) was loaded into MGLCs and imaged, revealing well-defined liquid pockets of various sizes in each quantifoil grid hole (Figure 1(c)). Furthermore, high-resolution TEM imaging of cerium oxide (CeO2) aggregates in MLCs revealed Moiré patterns due to stacked monolayers of MoS2 and sandwiched ceria aggregates (Figure 1(d)). EELS analysis further demonstrated oxidation state variations in ceria aggregates, where ceria outside the MLC exhibited a reduced oxidation state (Ce³+) with an M5/M4 ratio >1. In contrast, encapsulated ceria retained its oxidized Ce⁴+ state (Figure 2), aligning with previous reports on vacuum-induced reduction from Ce⁴+ to Ce³+ [8]. These findings establish MoS2 as an effective liquid cell window material, offering a contamination-free approach for high-resolution imaging and spectroscopy in liquid environments. Moving forward, we aim to systematically study electron dose and dose rate effects on radiolysis within MoS2-based liquid cells to optimize imaging conditions. The versatility of monolayer MoS2, along with its established role in semiconductor and electrochemical devices, makes it a strong candidate for next-generation liquid cells. Moreover, we plan to utilize MoS2-based liquid cells to investigate hydrogen evolution reactions at the atomic scale, enabling direct observation of reaction intermediates and dynamic processes in situ, which could provide deeper insights into electrochemical mechanisms [9]. (a) Schematic of a hybrid MoS2-Graphene liquid cell and (b) a pure MoS2 liquid cell with liquid encapsulated between two MoS2 layers. (c) TEM image of liquid pockets in an MGLC with ferritin encapsulation; bubbles (red arrows) induced at high electron dose for visualization. (d) High-resolution TEM image of ceria aggregates in MLC, showing Moiré patterns from stacked MoS2 layers and sandwiched ceria aggregates. EELS analysis of cerium oxide aggregates in MLC. (a) ADF image showing the analyzed regions. (b) EELS spectra of ceria aggregates: region 1 (outside MLC) shows Ce³+ with an M5/M4 ratio >1, while region 2 (encapsulated in MoS2) retains Ce4+, confirming oxidation preservation inside the liquid cell.
Language: English
Open Access status: bronze
OpenAlex ID: W4412908482
FWCI: 0.901
Cites: 8
Cited by: 3
Related to: 10