Year: 1973
Type: dissertation
Abstract: Each year about 500 people are killed in tractor overturning accidents in the United States, usually when the tractor operator is pinned and crushed beneath the tractor.Realization that tractor overturns can not always be prevented has led to the development of roll-over protection structures (ROPS) to protect the tractor operator from serious injury or death in the event of an accidental overturn.With the advent of the ROPS has come the need for testing the structures to assure the tractor operator that he will be protected during a tractor overturn.Many tests have been devised to simulate the loading conditions which the protective structure would be expected to encounter during an overturn, but controversies over the relative severity of the various tests and the severity of each test relative to accidental overturns in practice continue to prevent universal acceptance of any one testing procedure.An improved understanding of tractor motions during overturns is required before the ROPS loading conditions for that overturn nay be defined.A mathematical model is proposed to define the dynamics of a wide-front-end tractor during overturning motions.The model describes the tractor with ten degrees of freedom -six for the tractor body, one each for the rear wheels, one for the front end, and one for the engine rotation -yielding twenty first order ordinary differential equations.This model uses Euler parameters of the finite angle of rotation to describe the rotational motion of the tractor body, thus allowing large angles of rotation while eliminating problems of equation stability.Engine dynamics, rear wheel coupling, clutching features, and terrainenveloping tire characteristics make the model adaptable to many overturning situations.Verification of the mathematical model is provided by comparisons between tractor motions predicted by the mathematical model and those observed during 1/12 scale-model tractor overturns.Ten experimental side overturns of an unpowered tractor were recorded on highspeed film.Replications of two different overturn tests provided evidence that the repeatability of the experimental overturns is more than adequate to justify their use in verifying the mathematical model.A digital computer program was used to implement the mathematical model and simulate two of those overturns which were analyzed experimentally.Comparisons between the experimental and simulation paths of four tractor-body-fixed reference points throughout the overturns demonstrated the accuracy of the mathematical model in predicting rhe overturning motion of tractors.The computer program is presented and documented for use by interested researchers, The digital computer program provides capabilities for conducting parameter studies to determine the effects of tractor and terrain conditions on the overturning motions of wide-front-end or tricycletype wheel tractors.Energy and momentum information supplied by the program also provides capabilities for examining the energy levels which must be dissipated by roll-over protection structures.The inclusion of external force specification features may encourage future work in the comparison of ROPS testing procedures which restrain or do not restrain the tractor during loading.
Source: eCommons (Cornell University)
Author: Denny Davis
Institution: Cornell University
Language: English
Subfield: Automotive Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W56512420
