Digital control of an electro discharge machining (EDM) system
Year: 2005
Type: dissertation
Abstract: This thesis presents a model of the complete Electro Discharge Machining (EDM) system\nand the design and implementation of a digital controller for the servomotor control and the\ngap voltage and current pulse power generator. A Matlab/Simulink simulation is used to\ninvestigate the EDM system model behaviour and based on the simulation results, a\ncompensated EDM control system is designed. Simulation studies were also earned out to\npredict the material removal rate of a steel workpiece in mm3/min . The control software\nof the EDM control process and servo system control was performed mainly in software\nwith minimal hardware implementation. The control hardware consists of an eZdsp, userinterface\ndevice and analogue signal processing and interfacing circuit. The eZdsp\ncommunicates with the user-interface device by sending the information/instruction to the\nLCD screen while the user-interface device uses push button switches to communicate with\nthe eZdsp. It is shown that one DSP microcontroller can be used to provide the control\nfunctions for the EDM system.\nThe experimental studies of the Electro Discharge Machining process using a copper\nelectrode, a graphite electrode and steel workpiece materials are presented in tabular and\ngraphical forms. The analysis of the experimental results show that the material removal\nrate is influenced by the process parameters such as the gap current Igap• gap voltage V arc.\npulse on-time Ion, and sparking frequency F, as well as the material properties of the\nelectrode and the workpiece. Comparison studies between simulation and experimental\nresults show reasonable agreement. Further improvement was made to the EDM process\nmodel based on the comparison studies. As a result, the predicted material removal rate\nusing the improved EDM process model shows better agreement with experimental results.
Author: Azli Yahya
Language: English
Subfield: Industrial and Manufacturing Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W651217540
