Work

Characterization and Measurement of Communication Channels in the mmWave Band

Year: 2023
Type: dissertation
Abstract: 5G wireless technology promises to change society as we know it. This \nnew technology enhances the user experience by increasing the network data \nrate and the number of concurrent users, and reducing latency and power \nconsumption. To ensure all these improvements, there is a technological leap \nwhere all layers of the network are involved. From a physical layer perspective, \nthe main innovation is the frequency increase towards the millimeter \nwave band, also known as the mmWave band. To date, communication \nsystems have been based on the sub-6 GHz spectrum, which is currently \nsaturated due to the limited bandwidth. To address this issue, the research \ncommunity is focusing on the feasibility of the mmWave band (30 GHz - \n300 GHz) for commercial communications applications, since this band offers \ngreat advantages, such as large spectrum availability. However, there \nare also several technological challenges associated with millimeter waves, \nsuch as higher attenuation losses and the paradigm shift in propagation \nmechanisms compared to the sub-6 GHz band. In order to meet the necessary \nrequirements of this band, it is therefore essential to perform a detailed \nstudy and characterization of the propagation channel involved in the communication. \nIn this thesis, the main contribution is focused on the characterization \nand measurement of communication channels in the mmWave band. To this \nend, it proposes the study of the physical layer of the communication channel \nfrom different perspectives, such as optimization, simulation, emulation, \nclassification, characterization and measurement. Four main contributions \ncan therefore be identified. \nFirst, the use of optimization algorithms based on evolutionary algorithms \nhas been proposed to optimize key performance indicators in a simulated \nnetwork deployment. The simulation of propagation channels through \nsimulators and channel modeling simplifies the complexity of the analysis \ncompared to costly measurement campaigns, making it a suitable solution \nin the early stages of network development. Optimizing network parameters \nfrom a simulator thus provides a first approximation to the requirements \nof a real communication network. By optimizing the transmit power in the \nradiating elements of the network, it is possible to simultaneously improve \nseveral network parameters at multiple layers of such network. \nSecond, channel emulation and identification techniques have been developed \nfor the emulation and classification of propagation channels. On the one hand, channel emulation, based on the reconstruction of target channels \nin the laboratory, is an intermediate solution between theoretical simulators \nand complex measurement campaigns. The recreation of scenarios with \nspecific characteristics is useful for testing devices under specific operating \nconditions and for analyzing the communication channel. This thesis contemplates \nthe time-gating technique as a postprocessing method for channel \nemulation. On the other hand, scenario identification is crucial to understanding \nthe environments in which communications take place and deciding \nhow they should be conducted. In this thesis, dimensionality reduction \ntechniques are considered as a classification strategy for several propagation \nscenarios. Both channel emulation and scenario classification techniques \nhave been validated through measurements in controlled environments. \nThird, the knowledge of the channel response with respect to an incident \nwave is essential for establishing communication on a link. Therefore, it is \nnecessary to characterize the spatial and temporal profiles of the communication \nchannel by determining the direction-of-arrival and time-of-arrival \nof the channel multipath components. For this reason, this thesis develops \ntechniques based on the joint estimation of the direction-of-arrival and \ntime-of-arrival based on frequency invariant beamformers, which are robust \nto the large bandwidths employed in the mmWave band. In particular, two \ndifferent techniques have been proposed, one based on elliptical arrays for \n2D characterization, and the other based on toric arrays for 3D characterization. \nFinally, the thesis concludes with the presentation of a measurement \ncampaign in an industrial environment under operational conditions. The \ncharacterization of the propagation channel based on simulations and channel \nemulation is complemented and validated by measurement campaigns \nin the final stages of the development of a communication network. These \nindustrial environments have become particularly relevant due to industrial \nprocesses automation in factories. However, these environments are particularly \nchallenging due to their time-varying and high-density nature, leading \nto the high probability of link blockage. Therefore, this thesis examines \nthe radio propagation conditions in such environments and analyses how \nnetwork management techniques provide coverage in these challenging scenarios.
Language: English
Open Access status: green
OpenAlex ID: W6989930135
Cites: 363
Cited by:
Related to: 9