Implementation and preparation of a methodology for a laboratory-scale Bioaugmented Membrane Bioreactor (MBR) treatment plant for the treatment of denim wastewater
Year: 2017
Type: dissertation
Abstract: [EN] This work is part of the project called Textile Membrane Bioreactors (TEX-MEM), carried out at the Norwegian University of Life Sciences (Ås, Norway), in the Department of Water and Environmental Engineering. It arises from the need to conserve the quality of aquatic ecosystems due to textile industries emissions, one of the most polluting and water consuming in the world. The production of denim fabric is made with indigo dye, this artificial dye presents a deep blue colour that causes damages in the aquatic ecosystems. It is proposed to treat these industrial effluents through the use of Membrane Bioreactor (MBR) technology and bioaumentation, this technology is being increasingly used in water treatment, due to the improvement of effluent quality. In this work, a MBR aerobic system has been started at laboratory scale. A bibliographical review of the last 10 years of research on the use of MBR and bioaumentation in dye removal has been carried out. From the bibliographic research, a synthetic textile wastewater (STW) similar to effluents from the denim textile industry has been created, which will be used as an influent to the laboratory plant. The work consisted in the assembly and organization of a laboratory-scale pilot plant, in which automated pump systems and real-time pressure data reading were implemented. Ultrafiltration (UF) modules have been developed and their operating characteristics such as resistivity and permeability have been studied, the washing stages and the cleaning cycles have been controlled. In addition, a laboratory work methodology that consists of the study of the characteristics of reactor sludge has been developed to study: capillary suction time (CST), Z potential, mixed liquor suspended solids (MLSS), hydrophobicity, or dissolved oxygen; as well as membrane permeate characterization: chemical oxygen demand (COD) and absorbance. In addition, the results obtained from the first month of work have been analysed. The study achieves the start up two aerobic membrane bioreactors, with the same characteristics, one of them (MBR1) is the control and the other one (MBR2) has been inoculated with specific bacteria (bioaumentation) that degrade the indigo dye. The results obtained allow the study and laboratory work of this TEX-MEM project to continue, which is currently under data collection phase. In addition, it is important to note the importance of checking how bioaugmentation influences MBR performance and the behaviour of Ultrafiltration (UF) modules.
Author: Palop Donat, Carla
Language: English
Subfield: Water Science and Technology
Field: Environmental Science
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7001191069
