Work

Nanocelluloses in the production of fine papers: influence on the process and on the product quality

Year: 2020
Type: dissertation
Abstract: Nanocelluloses are a very promising material that has been widely explored for the most diverse applications. The pursuit for sustainable and environmentally friendly materials is in line with the nature of nanocelluloses and therefore they have emerged as the perfect candidate for plastics substitution, food additive, rheology controller, 3D printing of diverse structures, among many other possibilities. This derives from their interesting characteristics, such as reduced size and high specific surface area, high tensile strength, crystallinity and transparency, and from the fact that, such as cellulose, they are obtained from renewable sources, with relative ease for functionalization in order to obtain desired specificities. It makes sense to explore their benefits in the papermaking industry, a sector that is becoming very competitive, with emerging research and development of new products with new interesting functionalities. The aim of the present thesis was to assess the interactions between nanocelluloses and the several paper components and their influence in the papermaking process and on the paper products quality. Considering that the work was conducted in straight cooperation with the national papermaking industry, the research was focused on the uncoated wood-free papers and nanocelluloses were used as furnish additive or at the paper surface as sizing or coating agent. Several goals were outlined, related with the difficulties/obstacles and challenges proposed by the industry, namely to a) improve the paper dry and wet-web strengths, b) increase mineral filler retention, c) reduce the softwood content, d) reduce the pulp refining energy, while controlling parameters such as drainability and process runnability when using nanocelluloses in the paper furnish, but also to e) improve printing quality when used at the papers’ surface. To fulfil the objectives proposed, different nanocelluloses were produced from a bleached eucalyptus kraft pulp, by using distinct production processes, which conferred specific properties to the final product. The isolation of the fibrils from the pulp was performed by intensive mechanical treatment and pre-treatments based on enzymatic hydrolysis, TEMPOmediated oxidation or carboxymethylation were previously conducted in order to facilitate the disruption of the structure. All of the production processes used were based on the existing literature. Besides, bacterial nanocellulose, which is produced from a bottom-up methodology, was also tested. The different nanocelluloses produced originated very different results when applied in papermaking. When used at the fibrous matrix, the study of their interaction with mineral fillers has revealed to be very important and therefore a thorough assessment of the calcium carbonate flocculation was performed through laser diffraction spectrometry. It was found that, depending on the nanocellulose characteristics, strong PCC flocs could be obtained. However, this was only possible in specific conditions, namely a) if a minimum level of fibrillation occurred during nanocellulose production, which was attained by pre-treating the pulp previously to mechanical isolation and b) by controlling the extent of chemical modification, as too high charge led to reverse flocculation. Besides, the extent of flocculation could be controlled by adjusting the nanocellulose characteristics, such as the degree of polymerization or charge. When added to papermaking furnishes, nanocelluloses generally confirmed their great potential as strength enhancer. The most promising samples were those produced from enzymatic hydrolysis, as they were able to accomplish all of the goals pursuit. Besides, it was found that they were able to substitute the requirements for common retention agents, emerging therefore as a green replacer for these synthetic polymers. As for the functionalized nanocelluloses, interesting outcomes were found. Firstly, a limit for the content of carboxyl groups of the samples was established, as too much charge and reduced fibrils size was found to be detrimental in papermaking. Secondly, due to their negative nature, it was found that they interact preferentially with the common cationic paper additives, and therefore, their reinforcing potential was only possible in the absence of these additives. The drainability of the process was always negatively affected by the nanocelluloses presence. However, some strategies to mitigate this problem, based on high-filler loadings, were implemented. Nanocelluloses were also used at the papers’ surface, as coating material or as additive in common sizing formulations, with the goal to improve the inkjet printing quality. Their ability to form strong entangled networks, very known for the film forming properties, was responsible for more closed paper structures, able to retain the ink pigments more effectively, increasing therefore printability. When combined with starch, an interesting synergy was found and the results revealed that the addition of 5% of nanocellulose to sizing formulations was able to significantly improve the end-users color perception. In conclusion, the nanocellulose influence in the production process and final properties of fine papers was assessed and it was found that this new material can be produced in such a way that the industry requirements are fulfilled. Besides, a new commercial bioproduct, produced from the industry’s main raw material and with relevant potential applications was explored. In this sense, the paper industry will be not only improving its final product, but also adding value to one of the intermediate materials.
Language: English
Subfield: Biomaterials
Open Access status: green
OpenAlex ID: W7048830948
Cites: 224
Cited by:
Related to: 10