Work

In vitro evaluation of mechanical properties of compound resins with addition of zircony and and diatomite used in semidirect restorations

Year: 2020
Type: dissertation
Abstract: INTRODUCTION: The incorporation of filler particles in composite resins has the role of improving their physical and mechanical properties, providing greater resistance to restorations. Many composites have nanoparticles incorporated into their composition, such as quartz, zirconia, silica and, more recently, diatomite, which is a silica-rich sedimentary rock. The addition of these particles seeks to increase the surface area and promote greater interaction with the organic matrix. OBJECTIVES: This study aimed to evaluate bond strength (RU), fracture pattern (PF), polymerization depth (PP), flexural strength (RF) and elasticity module (ME) of conventional composite resins with zirconia addition, with addition of zirconia and diatomite and single increment, in restorations made by the semi-direct technique, in two aging times (24h and 6 months). METHODOLOGY: Trunk-cone cavities were created in dentin of bovine incisors (N = 136), for the manufacture of semi-direct restorations using resins: Bulk Fill (BF) (3M ESPE®), Resin Z250 XT (Z250XT) (3M ESPE®), Resin Zirconfill (ZF) (BM4®) and Z350 XT Resin (Z350XT) (3M ESPE®), cemented with RelyX Ultimate self-etching dual resin cement (3M ESPE®). The samples were stored for 24 hours and 6 months in an oven at 37ºC before the RU and PF tests were carried out, and the samples with 24 hours were selected for the PP test. For the RF and ME tests, using a silicone matrix, standard toothpicks (10.0 mm. X 1.0 mm. High x 2.0 mm.) Were made for each tested resin (n = 10) and also stored in an oven at 37ºC for 24h and 6 months before testing. RESULTS: In the immediate analysis, the ZF resin showed the highest RU among the groups and showed a statistically significant difference with the BF group. The Z350 resin increased its RU with the aging time. There was no difference between the RF of the resins analyzed after 24 hours, but after 6 months the Z250 showed the lowest average, while the other groups increased the RF over time, with the greatest increase for the ZF group. Regarding ME, only resins Z350 and ZF showed a statistically significant difference with the aging time of the samples, increasing this value. Mixed fractures were predominant for all composites in both aging times and for PP, no statistically significant differences were found between the study groups. CONCLUSION: The resins that contained added zirconia or zirconia and diatomite in their inorganic content, as well as the single-increment resin showed positive behaviors in relation to the properties of RU, RF and ME, mainly for resins Z350XT and ZF. Clinical studies are recommended to confirm the results of this laboratory study.
Language: Portuguese
Field: Dentistry
Open Access status: green
OpenAlex ID: W7120638136
Cites:
Cited by:
Related to: 10