Experimental and Numerical Study of the Structural Performance of Extruded, Pressed, and Fired Ceramic Blocks Under Different Load Conditions
Year: 2026
Type: article
Abstract: This study presents an experimental and numerical investigation of the structural performance of masonry built with Extruded, Pressed, and Fired Ceramic Blocks (BCEPQ), an emerging class of units for structural masonry systems. Despite their potential advantages, the mechanical behavior of BCEPQ units assembled through dry interlocking remains largely unexplored. An extensive experimental program was conducted, including physical and mechanical characterization of the blocks, compressive testing of prisms and small walls, and full-field deformation measurements using Digital Image Correlation (DIC). The blocks exhibited a characteristic compressive strength of 4.86 MPa and water absorption of 22.83%, while prisms and small walls reached average compressive strengths of 1.66 MPa and 0.98 MPa, respectively, with brittle failure modes governed by stress concentration and interface effects. A three-dimensional finite element model was developed in ANSYS 2024 R1 using experimentally obtained properties and linear elastic assumptions. Numerical results reproduced the main trends observed experimentally, with an average discrepancy of approximately 20%, confirming the exploratory nature of the model. The study provides unprecedented experimental data on BCEPQ masonry, highlights structural limitations associated with mortarless assembly, and offers technical insights to support future improvements in block geometry, manufacturing processes, and computational modeling of ceramic masonry systems.
Source: Cerâmica
DOI: 10.1590/qbrx3719
Institution: State University of Norte Fluminense
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W7155976868
