Work

Influence of Gas Nitriding on Erosion of Aisi 316l Austenitic Stainless Steel: Parametric Study

Year: 2017
Type: article
Abstract: Erosion due to impact of hard and abrasive particles is a common phenomenon observed in many practical situations. A number of operating variables such as impact angle and impact velocity affect the erosion process. In the present work, AISI 316L austenitic stainless steel has been examined to study the effects of gas nitriding process parameters on its erosion wear resistance. Optical microscope, X-ray diffraction (XRD) and surface hardness measurements were used to investigate the properties of the nitrided layers produced during gas nitriding by ammonia in the range of (400–600°C) nitriding temperature, (10–50 hr.) nitriding time and (100-600 L/hr.) ammonia flow rate. The results of this study showed that gas nitriding of AISI 316L stainless steel produces nitrided layers that vary in thickness, composition and hardness according to the different nitriding conditions. Compared to the untreated material, the results of the erosion test show an improvement in erosion resistance after gas nitriding that can be related to the nitrided layer properties. This improvement in erosion resistance is dependent on the impact angle and could attain, within the range of process parameters considered in this study, a value of about 93% in the 30 ° test and 54% in the 90° test.
Language: English
Open Access status: hybrid
OpenAlex ID: W7159986145
FWCI:
Cites: 11
Cited by:
Related to: 10