Work

Aircraft-level vibration effects on hyperfine laser locks for Rydberg electric-field sensing

Year: 2026
Type: article
Abstract: We present a subsystem-isolated study of aircraft-level vibration coupling to a hyperfine laser lock and its propagation to a two-photon Rydberg superheterodyne RF sensor. Here, the probe laser is stabilized to an atomic hyperfine transition, and RF electric fields are detected via a Rydberg-atom superheterodyne process that down-converts the signal to an optical readout. A compact Doppler-free saturated-absorption spectroscopy (SAS) module probing the 87 Rb 5 S 1/2 →5 P 3/2 hyperfine manifold was driven to NASA DC-8 in-flight vibration levels (<2kHz) to investigate the effects of vibration on the stabilization of a 780 nm laser. The stabilized 780 nm probe was combined with a 480 nm coupling laser to excite a room-temperature Rydberg sensor to the 63 D 5/2 state and driven for the RF superheterodyne detection via a ∼8.35GHz local oscillator coupling to the 64 P 3/2 state (RF 100 kHz detuned). Under nominal PID settings, vibration introduced low-frequency noise but did not cause the laser to unlock nor did it degrade the atomic RF readout. Probe wavemeter Allan deviations remain ⟨60kHzat τ ⟩20s at with and without vibration, indicating no loss of lock or MHz-scale drift. Independent frequency-noise-density measurements show no measurable difference between vibration and no-vibration conditions under nominal PID settings. The Rydberg spectrum showed <10% RF-amplitude deviation and a sensitivity of ∼1.5×10 −5 Vm −1 Hz −1/2 . Increasing integral gain by >10 3 transferred vibration noise to the servo, elevating low-frequency noise in the atomic RF spectrum, but with no measurable degradation of the RF sensing at 100 kHz detuning.
Language: English
Open Access status: hybrid
OpenAlex ID: W7160055082
FWCI:
Cites: 35
Cited by:
Related to: 10