Work

Washer-shaped piezoresistive nanocomposite sensor for detecting tightness loss in bolted joints

Year: 2026
Type: article
Abstract: A novel approach for detecting bolt tightness loss is presented, employing real-time measurements from washer-shaped piezoresistive nanocomposite sensors. The sensor is composed of natural rubber embedded with carbon nanotubes (CNT) and carbon black (CB), which together introduce conductivity within the rubber matrix. The electrical conductivity of nanocomposites with different CNT and CB contents was first evaluated under static conditions and subsequently investigated through compression tests to assess their electrical response under varying loading levels, confirming the piezoresistive behavior of the nanocomposites. The washer-shaped sensor was used to monitor bolted joints in two configurations: bolts arranged in one dimension and in two dimensions. The shape of the sensor allows it to be installed along with the washer and receive the compression load that the bolt applies to the structure. In the two bolted joints, specific bolts were subjected to loosening at different levels to assess the detection of damage in the structure. The sensor reliably detected torque variations, including in bolts that were not directly loosened, demonstrating its capability to monitor entire joints without instrumenting every bolt, because of the redistribution of loads caused by the loosening of one of the bolts. Tests conducted on the bolted joint under dynamic excitation and different bolt tightening levels demonstrated that the sensor did not significantly affect the dynamic properties of the structure, except when the bolts were extremely loose, a condition under which structural damping tends to increase considerably. The proposed approach demonstrates the capability to identify bolt loosening, with the sensor providing qualitative measurements that indicate the presence of damage and showing the potential to detect torque variations on the order of 0.2 Nm. Therefore, the proposed sensor is capable of identifying and monitoring loosening in bolted joints, combining ease of installation, data acquisition, real-time monitoring, and decision-making, while maintaining a low implementation cost.
Source: Measurement
Language: English
Open Access status: hybrid
Estimated APC paid: $3,760
OpenAlex ID: W7160717841
FWCI:
Cites: 38
Cited by:
Related to: 9