Year: 2026
Type: article
Abstract: This study identifies the dominant limiting parameters for developing a dam crest deformation model under earthquake loading. Data from 29 embankment dams in Indonesia with different geometric and material characteristics were considered. Six candidate parameters were initially evaluated, namely dam height (H), dam length (P), dam crest width (L), embankment slope (S), shell material friction angle (φ), and the ky/kmax ratio. The initial permanent dam crest deformation was estimated with the Makdisi and Seed method under several earthquake magnitude scenarios. The influence of each candidate parameter was evaluated using statistical correlation analysis. The results show that only dam height and shell material friction angle have strong and statistically significant relationships with the dam crest deformation. The dam height shows a strong correlation with the dam crest deformation (r = 0.61, t = 3.71, p = 0.0009), while the shell material friction angle shows the strongest correlation (r = 0.67, t = 4.81, p = 0.0001). In contrast, dam length, dam crest width, embankment slope, and ky/kmax ratio show weak and statistically insignificant relationships. These findings indicate that the dam crest deformation tends to increase with increasing dam height and to decrease with increasing of shell material friction angle. Therefore, dam height and shell material friction angle were selected as the main limiting parameters for developing a practical empirical model for the preliminary assessment of the earthquake-induced dam crest deformation.
DOI: 10.48084/etasr.19566
Institution: University of Brawijaya
Language: English
Topic: Dam Engineering and Safety
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $431
OpenAlex ID: W7202257828
