Work

Carbon nanotube/ thermoplastic polyurethane (CNT/TPU)-based triboelectric nanogenerator with self-charge pumping for implantable knee load sensing and energy harvesting

Year: 2026
Type: article
Abstract: Aseptic loosening and joint instability remain the primary modes of failure in total knee arthroplasty. To provide real-time biomechanical load monitoring, this study presents a triboelectric nanogenerator (TENG) utilizing a carbon nanotube/foamed thermoplastic polyurethane composite dielectric layer paired with a Kapton tape between dual electrodes. By leveraging the triboelectric effect, the device functions simultaneously as an energy harvester and a self-powered load sensor. To overcome power density limitations, a self-charge pumping mechanism via a multi-stage voltage multiplier circuit (VMC) was integrated and evaluated under physiological cyclic loading (2100 N at 1 Hz). The system’s charge dynamics were further validated using an analytical energy-based model. Across configurations, the 3-stage VMC dramatically boosted performance, achieving a peak apparent power output of 17 μ W compared to 3 μ W for the unamplified TENG, with optimal storage capacitance determined at 470 pF, 1 nF, and 10 nF for 1-, 2-, and 3-stage VMCs, respectively. While the 1-stage setup yielded the highest force sensitivity (94.45 mV N − 1 ), the 3-stage configuration maximized energy capture–highlighting a key operational trade-off between sensing sensitivity and power harvesting for implantable orthopedics.
Language: English
Open Access status: hybrid
Estimated APC paid: $3,325
OpenAlex ID: W7204113264
FWCI:
Cites: 45
Cited by:
Related to: 10