Work

Assessment of composite modulus in Otta seal surfacing utilizing aggregate quarry by-products

Year: 2026
Type: article
Abstract: Otta seal is an economical bituminous surface treatment that has gained attention as a sustainable alternative for low- and medium-volume roads. Unlike conventional chip seals requiring high-quality aggregates, Otta seal accommodates a wide range of locally available materials, including marginal aggregates. Quarry by-products (QBs), an abundant and well-graded industrial by-product of crushed stone operations, present potential as an alternative aggregate for Otta seal applications. This study investigates structural and functional performance of QB-based Otta seal surfacing using a controlled small-scale laboratory box setup. Dense-graded CA-6 aggregate was placed as the base layer, while QB aggregates combined with a high-float rapid-set (HFRS) asphalt emulsion were used for single- and double-layer Otta seals. A modified Kearby method, adopted from chip-seal design, was employed to determine aggregate and binder application rates. The composite modulus, representing the stiffness of all pavement layers combined, was evaluated using a lightweight deflectometer (LWD), while surface texture was characterized through close-range photogrammetry (CRP). Results exhibited an increase in dynamic deformation modulus (E vd ) after Otta seal application, attributed to enhanced surface stability from binder-aggregate interaction that reduces particle mobility and thereby minimizes localized deformation, as well as improved stress dispersion provided by the thin, stiff layer. While surface roughness decreased due to binder penetration and void filling, the more uniform sand-sized QB surface may promote more consistent tire-surface contact, contributing to reliable friction performance.
Language: English
Open Access status: diamond
OpenAlex ID: W7204187515
FWCI:
Cites: 15
Cited by:
Related to: 10