Bearing Voltage Prediction-Based Selective NLM Correction for EDM Suppression in Marine MMC Propulsion Drives
Year: 2026
Type: article
Abstract: Bearing damage caused by electric discharge machining (EDM) is a concern in electric ship propulsion drives, particularly during low-speed operations such as maneuvering and slow steaming. In a modular multilevel converter (MMC) operated with nearest-level modulation (NLM), rounding of the three-phase submodule insertion numbers produces a residual imbalance that appears as common-mode voltage (CMV) and charges the bearing film capacitance. The peak bearing voltage rises from 6.4 V at 60 Hz to 20.0 V at 10 Hz, while the thinning lubricant film lowers the dielectric breakdown threshold. Always-on CMV reduction approaches apply a corrected switching candidate in every control period, including intervals where the bearing voltage stays well below the threshold. This paper proposes a selective NLM correction driven by predicted bearing voltage risk: a reduced-order RC model predicts the bearing voltage the conventional NLM candidate would produce, and a hysteretic controller applies a zero-CMV candidate only when that prediction approaches the insulation threshold. Using a worst-case discharge criterion and thresholds of 5.9–29 V derived from elastohydrodynamic film thickness estimates, simulations at 10 Hz show that the method eliminates EDM events over the full evaluated threshold range. It achieves the same zero-EDM outcome as always-on correction while reducing the correction mode activation ratio from 100% to at most 30.8%, and remains inactive where conventional NLM is already safe.
DOI: 10.3390/jmse14171573
Institution: Korea Maritime and Ocean University
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
Awards: G1971711735, G7106289013
OpenAlex ID: W7204197004