Year: 2022
Type: conference-paper
Abstract: Calcined clay blended cement (LC 3 types of cement) is one of the most promising solutions for CO 2 abatement in global cement industries. This study presents results on the characterization of products obtained in simultaneous calcination of kaolinitic clay blends co-fired with low-grade powdered fuels. Powdered rice husk is used as fuel and kaolinite clay is co-fired with rice husk. Calcination is performed in a nearly isothermal Moderate to Intense Low Oxygen Dilution (MILD) reactor. Results of co-firing experiments with a 1:1 ratio of biomass to clay with a nominal fuel feed rate of 5 – 6 kg/h are presented. This operating condition ensured that the particles are exposed to a temperature of 900–1100°C. The suitability of the obtained product was characterized using – (i) furnace tests, (ii) thermogravimetric analysis (TGA), (iii) X-ray diffraction (XRD) studies, and (iv) isothermal calorimetry. Furnace tests and TGA studies confirm the biomass conversion and clay conversion to be about 90% and 94% respectively. About 75% of calcination could be achieved compared to furnace-calcined clay. XRD analysis shows near complete conversion of kaolin peaks. Calcined clay exhibited a filler effect indicating its reactivity in Portland cement-clay blended system.
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7204361473
