Work

Catalyzed Alkaline Hydrolysis for Recycling Post-consumer Polycotton Waste into Paper

Year: 2026
Type: dissertation
Abstract: The amount of textile waste is increasing , and less than 1% of the total waste is currently being recycled. The waste is difficult to handle and one of the major problem is the growth in fast fashion industry and blended textiles such as polycotton. Polycotton is difficult to recycle as it is a mix of both polyester and cotton, which are chemically different. This thesis explore the recovery of cotton fibers from post-consumer polycotton textile with a ratio of 50:50 and their application in paper making by alkaline hydrolysis along with a cationic surfactant HDTMAC. For comparative analysis a cotton rich sample was tested. Chemical separation using alkaline hydrolysis is a preferred method to reuse the cotton fibers, as cotton can maintain its integrity in alkaline environments without damage, instead of acid hydrolysis which is better if polyester recycling is in focus. After alkaline hydrolysis PET could also be recovered from the filtrate which was not in scope of this work. Two separate methods were used standard alkaline hydrolysis, and alkaline hydrolysis assisted with a cationic surfactant HDTMAC. The hydrolyzed fibers were refined and the pulp was used for making the hand sheets also were tested for the freeness measurement. Results showed the degradation of polyester could be possible from both the methods, but better removal could be achieved by alkaline hydrolysis with HDTMAC. The hand sheets were tested for the mechanical strength, and the sheets made via both the methods showed very low tensile index as complete polyester removal was not achieved. CIELAB color space showed increase in the lightness by both the methods, but alkaline hydrolysis assisted with HDTMAC showed a consistent increase. FTIR analysis also confirmed that HDTMAC along with alkaline hydrolysis is a better approach for the removal of polyester at shorter time as compared to standard alkaline hydrolysis as the peaks of the polyester were seen significantly diminished. The results showed that complete polyester removal is important that could be achieved otherwise polyester will interfere with the strength of the paper. Overall, the method provides a feasible approach to make paper by polycotton recycling but requires necessary modifications in the hydrolysis process as well as increase in the refining time.
Author: Ali, Mahnoor
Language: English
Open Access status: green
OpenAlex ID: W7204607982
Cites: 44
Cited by:
Related to: 10