Work

Optimizing the Heat Transfer of the Stirling Engine Heater, the Biomass Fuelled Type

Year: 2026
Type: article
Abstract: This paper presents a numerical investigation of heat-transfer enhancement in a biomass-fired Stirling engine heater using ANSYS Fluent.The engine heater head consists of 14 U-shaped tubes with annular fins.The fluegas inlet temperature and mass flow rate were 1014.248K and 5.175 × 10⁻³ kg/s, respectively, while the helium inlet temperature and velocity were 304.15K and 2.5 m/s.Six heater configurations were evaluated to investigate the effects of chamber geometry and buffer-plate arrangement on thermal performance, flue-gas circulation, and tube protection.Cases 1 and 2 gave the highest temperature-based thermal efficiencies of 94.6% and 94.0%, respectively.However, Cases 3-5 improved flue-gas circulation and tube protection.Increasing helium velocity from 2.5 to 20 m/s increased total heat transfer from 166.7 to 980.9 W, but pressure loss also increased from 245.2 to 1895.39 Pa.The preferred design should be based on a multi-objective criterion rather than thermal efficiency alone.
Language: English
Open Access status: hybrid
OpenAlex ID: W7204635550
FWCI:
Cites: 20
Cited by:
Related to: 10