Resolving contradictory mechanical performance of untreated tire rubberized concrete: A mechanism-based review
Year: 2026
Type: article
Abstract: More than 800 million end-of-life tires are generated annually, motivating the use of untreated tire rubber aggregates in concrete as a resource-efficient material. Thus, this review integrates more than three decades of experimental and numerical evidence on the mechanical, thermal, interfacial, and durability performance of tire-rubberized concrete. In general, higher rubber contents reduce compressive strength, stiffness, reinforcement bond, shear capacity, and thermal conductivity, but improve deformability and energy dissipation. These responses depend not only on nominal replacement level, but also on rubber density, particle morphology, dosage basis, water-to-cement ratio, processing conditions, and specimen geometry. Findings remain inconsistent regarding particle-size effects, carbonation resistance, shrinkage, energy absorption, and long-term deterioration. Statistical analysis of 137 strength-reduction records and 79 tensile records, supported by bootstrap confidence intervals, residual diagnostics, and repeated hold-out validation, showed that mass- and volume-based dosage metrics perform similarly for long-term predictions, with RMSE values of 0.057 and 0.058, respectively. At early ages, mass-based dosage performs modestly better, producing an RMSE of 0.111 compared with 0.128. Moreover, as compressive strength rises from 7 to 50 MPa, the tensile-to-compressive strength ratio falls from approximately 0.14 to 0.08, consistent with conventional concrete relationships. Resolving contradictory particle-size findings requires numerical models that isolate particle, interfacial, thermal, and time-dependent mechanisms. Current simulations remain constrained by simplified geometries and non-independent calibration data. Future research should standardize rubber characterization, report dosage by both mass and volume, and develop coupled multiscale models validated using independent mixtures.
Institutions: University of Zambia, Southeast University, Charles University
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,640
OpenAlex ID: W7204669754
