Phase transformation, texture evolution, and mechanical properties in a metastable medium-entropy alloy
Year: 2026
Type: dissertation
Abstract: Medium- and high-entropy alloys (MEAs/HEAs) have attracted considerable attention because their multiple principal-element compositions can produce a unique combination of strength, ductility, toughness, and thermal stability that are difficult to achieve in conventional alloys. However, the complex chemical interactions in these alloys can also promote the formation of intermetallic phases and metastable microstructures, making their deformation and phase transformation behaviour significantly more complex and less understood.This thesis investigates the microstructural evolution, phase transformation pathways, precipitation behaviour, crystallographic texture development, and mechanical response of a metastable Fe₄₅Co₃₅Cr₁₀V₁₀ MEA subjected to cold rolling, isochronal annealing, and isothermal ageing. The study establishes the fundamental role played by deformation-induced martensitic transformation, annealing-induced phase reversion, recrystallisation, and precipitation in tailoring texture evolution and strength–ductility balance of this metastable MEA.The Fe₄₅Co₃₅Cr₁₀V₁₀ MEA fully comprises of a single-phase fcc (γ1) in its as-homogenised condition. Cold rolling induces transformation of the γ phase into hexagonal close-packed (hcp,ε) and body-centred cubic (bcc, α′) martensite. Plastic deformation of the parent fcc phase is accommodated by dislocation slip, stacking fault formation, shear banding, and deformation induced martensitic transformation. Two distinct transformation pathways are identified: (i) fcc → hcp → bcc via the Shoji–Nishiyama (S–N) and Burgers orientation relationships (ORs), dominant at intermediate strains, and (ii) direct fcc → bcc via the Kurdjumov–Sachs (K–S) OR at thickness reductions exceeding 60%. Both pathways involve strong variant selection at the individual fcc-grain level, governed by parent grain orientation and strain level. With increasing thickness reduction, the pairing preference of deformation-induced bcc martensite variants shifts from same crystallographic packet selection to same Bain group selection, reflecting evolving transformation constraints during severe deformation.Cold rolling produces a pronounced Brass-type fcc rolling texture characterised by a strong αα′ - fibre with maximum intensity near Br γ, accompanied by weaker G γ and near S γ components beyond 40% reduction. The Brass-type texture development is attributed to shear banding and the preferential transformation of Cu γ and S γ orientations into hcp and bcc martensite. The deformation-induced hcp martensite exhibits maxima along the {hkil} fibre approximately 27° from the basal (0001) fibre, whereas the bcc martensite develops strong αα′ and γα′ -fibres. Micro-texture modelling confirms that these martensitic textures originate primarily from Cu γ and S γ orientations through S–N OR–mediated variant selection.Isochronal annealing for 300 s reveals that deformation-induced bcc → fcc reversion initiates at 675 °C and completes by 750 °C following the Nishiyama–Wasserman (N–W) OR with variant selection. The dominant reversion mechanism transitions from diffusion-controlled between 675–725 °C to martensitic reversion above 725 °C. Concurrently, discontinuous recrystallisation of the fcc phase occurs along prior grain boundaries and shear bands. Between 625–750 °C, reverted fcc exhibits strong G γ, Br γ, and GT γ components with variant selection. Above 750 °C, these orientations weaken and new components emerge, including (120)[2̅10]γ, RBrγ, and (214)[21̅1]γ orientations, primarily due to annealing twinning, indicating the low stacking fault energy of the investigated MEA.A Cr–V-rich σ phase precipitates between 625–725 °C along deformation-induced α′ grain boundaries and triple junctions, dissolving above 725 °C. Its formation is facilitated by enhanced solute diffusion within the bcc lattice. The σ phase forms predominantly incoherent or semi-coherent interfaces with both fcc or bcc matrices. Combined high-resolution electron microscopy and thermodynamic modelling reveal that Cr and V depletion from the disordered bcc matrix promotes short- and medium-range chemical ordering (CSRO/CMRO) within 6 h of isothermal annealing at 625 °C. With prolonged ageing, these ordered domains evolve into FeCo-rich longrange ordered B2 precipitates. Ageing of recrystallised single-phase fcc at 625 °C produces a σ + B2 dispersion via diffusion-controlled nucleation and growth, whereas ageing at 650 °C results in σ + disordered bcc precipitation without B2 formation.Uniaxial tensile testing demonstrates that the degree of precipitation and recrystallisation critically governs strength–ductility balance. A partially recrystallised microstructure obtained at 725 °C, comprising predominantly fcc with minor σ + bcc fractions, exhibits optimum strength–ductility balance with yield strength ~1330 MPa, ultimate tensile strength ~1346 MPa, and total elongation ~42.6%. This enhanced performance arises from the combined contributions of transformation-induced plasticity, strain partitioning, and controlled secondary phase fractions. Ageing at 625 °C for 96 h yields optimal strength-ductility balance (YS ~780 MPa, UTS ~1240 MPa, TE ~23%) through fine σ + B2 precipitation strengthening. However, over-ageing (192 h; σ + B2 fraction ~0.65) leads to embrittlement. In contrast, ageing at 650 °C preserves higher ductility (TE ~33%) at reduced strength due to the absence of the hard and brittle B2 phase.The unaged recrystallised single-phase fcc microstructure exhibits three-stage strain hardening involving dislocation slip, deformation twinning, and deformation-induced martensitic transformation. Ageing suppresses twinning and martensitic transformation, reducing strain hardening to two stages and altering work-hardening kinetics.Overall, this thesis elucidates the complex coupling between deformation mechanisms, phase transformation pathways, chemical ordering, precipitation reactions, and crystallographic texture in a metastable Fe₄₅Co₃₅Cr₁₀V₁₀ MEA. The findings provide insight into controlling transformation-assisted plasticity and precipitation strengthening to optimise strength–ductility synergy in metastable MEAs, thereby offering design guidelines for advanced high-performance structural materials.
Author: Ibrahim Ondicho
Institution: University of Wollongong
Language: English
Topic: High Entropy Alloys Studies
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Keywords: medium-entropy alloys, metastable microstructure, deformation-induced martensitic transformation, recrystallization, precipitation chemistry, crystallographic texture, shear banding, stacking faults, variant selection, Kurdjumov-Sachs orientation relationship, strength-ductility balance, isothermal aging, isochronal annealing, cold rolling
Open Access status: green
OpenAlex ID: W7204933859
