Work

Preparation and characterization of diopside glass-ceramic substrates via aqueous tape casting

Year: 2026
Type: article
Abstract: With advances in wireless communications and the miniaturization of sensors and microelectronic devices, the demand for compact and multifunctional devices has increased significantly, driving research into the fabrication of microwave dielectric ceramics. This study reports the formulation and characterization of stable suspensions of diopside glass particles in an aqueous medium, enabling the formation and sintering of thin glass-ceramic substrates less than 1 mm thick via tape casting. To this end, glass particles with different particle size distributions, produced after three different grinding times (6, 12, and 24 h), were used as precursors to prepare water-based slurries. The slurry rheology was tailored to achieve the highest possible glass powder concentration, thereby enabling high green packing in tape-cast substrates. In this study, a tape-casting machine was developed and used to form thin tapes from suspensions of diopside glass powder. The obtained tapes were sintered under non-isothermal heating at 5 °C/min, and their linear shrinkage was optically monitored in situ . The tapes' physical, thermal, and microstructural properties were evaluated in the green state and after sintering. An average particle size of 6 μm, together with optimized rheological and dispersion conditions, enabled the preparation of suspensions with up to 49 vol% glass powder and tapes approximately 1 mm thick. The linear shrinkage during sintering varied with the green packing, which depended on the initial concentration of glass powder. The highest glass powder concentration and packing density were achieved with the broadest particle distribution ( D 50 = 13 μm), resulting in a linear shrinkage of 14%. Furthermore, microwave dielectric characterization of the fully crystallized material yielded a relative permittivity of 3.96 at 30 GHz. These functional properties, together with the optimized processing parameters, indicate that the resulting tape-cast diopside glass-ceramic substrates are promising candidates for high-frequency applications.
Language: English
Open Access status: hybrid
Estimated APC paid: $3,830
Award: G338110042
OpenAlex ID: W7212028331
FWCI:
Cites: 59
Cited by:
Related to: 7