A study of the mechanical behavior of knitted nitinol wire sleeves under radial compression and their test application as stents for esophageal and large-vessel stent grafts
Year: 2026
Type: article
Abstract: This study investigates the mechanical behavior of knitted nickel-titanium (TiNi) wire sleeves under radial compression to evaluate their potential as elements for esophageal and large-vessel stent grafts. Sleeves made from wires with diameters of 60, 150, and 180 μm were subjected to cyclic radial compression and unloading tests. The results demonstrate a significant influence of wire diameter on radial force, with thicker wires (150 and 180 μm) generating higher forces. The tests revealed the samples' ability to withstand over 70% deformation without failure and exhibited almost complete shape recovery upon unloading, indicating their suitability for catheter-based delivery. Comparison with commercial esophageal stents showed that the sleeves fabricated from 150 and 180 μm wire produced radial forces comparable to those of clinical standards (e.g., 146 N versus 150 N at 50% compression), making them promising candidates for esophageal applications. In contrast, the sleeve made from 60 μm wire generated substantially lower forces. However, its force values at an oversize ratio of 1.4 were comparable to those of stent grafts for large arteries (4.5 N versus 4.2 N for the E-vita Open Plus device), suggesting its potential use in aortic stent grafts deliverable through catheters with a diameter of 4 mm or greater. The study concludes that personalized stent selection requires further computer modeling of patient-specific vessels or esophagus mechanics.
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7223333285
