Re-assessing volumetric energy density as a process descriptor for tribological behavior in SLM 316L stainless steel
Year: 2026
Type: article
Abstract: The volumetric energy density (VED) is widely used as a universal descriptor within the Selective Laser Melting (SLM) process. However, results on its ability to predict wear behavior and surface integrity in 316L stainless steel are inconsistent. Herein, we evaluated the influence of SLM process parameters, including laser power, scan speed, and VED, on the surface characteristics and tribological performance of SLM-fabricated 316L stainless steel. Specimens produced with varied process parameters were characterized in terms of porosity, hardness, surface roughness, friction coefficient, wear, and pore morphology. This was followed by a statistical ranking and correlation approach to identify relationships between processing parameters, material characteristics, and tribological performance. Results showed densification was maintained over an extended energy density up to 519 J/mm 3 , exceeding the upper bounds of commonly reported optimal VED windows for SLM 316L. Porosity and hardness were both strongly correlated with VED and laser scan speed. Although VED was strongly associated with surface characteristics such as porosity, it has shown substantially weaker relationships when predicting tribological performance. Specimens fabricated with similar VED values demonstrated widely different friction and wear responses. Overall, the findings demonstrate that the usefulness of VED depends on the response being considered. VED provides a useful representation of energy input for describing densification and hardness within the investigated conditions, but it cannot be regarded as a universal descriptor of tribological performance. These findings highlight the need to distinguish between descriptors of material formation and descriptors of friction and wear in SLM 316L stainless steel.
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,640
Funder: University of Jeddah
OpenAlex ID: W7225752693
