Avaliação De Coeficientes De Correção Do Teor De Umidade Para Propriedades Mecânicas De Madeiras Da Classe De Resistência D40
Year: 2026
Type: article
Abstract: Moisture is a variable that directly influences the strength and stiffness of wood. Therefore, a moisture content of 12% is established as a standard condition for the design criteria of wooden structures described by Brazilian standard ABNT NBR 7190-1:2022. If the test specimen has a moisture content different from the standard during the test, the mechanical properties obtained must be corrected. The two normative correction equations differ in terms of the correction coefficient for strength and stiffness properties. However, the generality of these coefficients and their inaccuracy in certain cases raise concerns about structural safety. Given the above, the objective of this study was to determine more representative moisture content correction coefficients for wood species in strength class D40 and to evaluate the impacts of the proposed and standard coefficients on the structural design of a flat wooden truss roof. To this end, twin specimen tests were conducted at two moisture contents: 12% and 25%. The results demonstrated that the Brazilian normative correction coefficient does not accurately represent the variation in mechanical properties as a function of moisture content for the species evaluated, exhibiting non-conservative behavior in most of the situations investigated. Additionally, due to the brittle failure mode associated with parallel-to-grain shear strength, this property exhibited the greatest variation among the estimates obtained under the different scenarios.
Language: English
Subfield: Building and Construction
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W7225753519
