Year: 1993
Type: conference-paper
Abstract: Diverse polymeric materials, including several variations of Kapton, were flown on STS-46 as part of the Evaluation of Oxygen Interaction with Materials Experiment (EOIM-3).These materials were flown in the cargo bay and exposed to the space environment July 31 -August 8, 1992, including 40 hours of direct atomic oxygen impingement.The atomic oxygen exposure was approximately 2.2 x 10 20 atoms/crn 2. Polymeric materials flown on EOIM-3 include coated and uncoated Kapton, Tefzel ETFE, Lexan, FEP and TFE Teflon, bulk Halar and PEEK, $383 silicone and Viton elastomeric seal material.Analyses performed included thickness measurements using Dektak and eddy current methods, mass loss, resistance, permeability, hardness, and F'HR.The effects of stress and the space environment on Kapton were also evaluated.Previous EOIM missions on STS-5 and STS-8 and the Long Duration Exposure Facility also contained polymeric material samples.Data from these previous flights are shown for comparison, as well as ground simulation of space environment effects using both thermal energy flow tubes and 5 eV neutral atomic oxygen beam facilities.Reaction efficiencies for the various atomic oxygen exposure conditions are discussed.
DOI: 10.2514/6.1993-4103
Institution: Marshall Space Flight Center
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W832828537
