Get started
Author

Mirosław Jakub Kruszewski

Observed names: Jakub Kruszewski, M. J. Kruszewski, M. Kruszewski, M.J. Kruszewski, Miroslaw J. Kruszewski, Miroslaw Kruszewski, Mirosław J. Kruszewski, Mirosław Kruszewski
ORCID: 0000-0002-2576-9006
Observed ORCID: 0000-0002-2576-9006
OpenAlex ID: A5066641366
Diamond–tungsten based coating–copper composites with high thermal conductivity produced by Pulse Plasma Sintering
2015 · Andrey M. Abyzov, Mirosław J. Kruszewski, et al. · Materials & Design (1980-2015) · 148
Design of interfacial Cr3C2 carbide layer via optimization of sintering parameters used to fabricate copper/diamond composites for thermal management applications
2017 · Łukasz Ciupiński, Mirosław J. Kruszewski, et al. · Materials & Design · 142
Interfacial microstructure of copper/diamond composites fabricated via a powder metallurgical route
2014 · Justyna Grzonka, Mirosław J. Kruszewski, et al. · Materials Characterization · 76
Thermal conductivity enhancement of copper–diamond composites by sintering with chromium additive
2014 · Patrycjusz Mańkowski, Adam Dominiak, et al. · Journal of Thermal Analysis and Calorimetry · 65
PDF
Thermoelectric properties of Cu2S obtained by high temperature synthesis and sintered by IHP method
2020 · Pawel Nieroda, Juliusz Leszczyński, et al. · Ceramics International · 42
A comparison of the microstructure-dependent corrosion of dual-structured Mg-Li alloys fabricated by powder consolidation methods: Laser powder bed fusion vs pulse plasma sintering
2022 · Anna Dobkowska, Łukasz Żrodowski, et al. · Journal of Magnesium and Alloys · 40
PDF
Heat Treatment of NiTi Alloys Fabricated Using Laser Powder Bed Fusion (LPBF) from Elementally Blended Powders
2022 · Agnieszka Chmielewska, Bartłomiej Wysocki, et al. · Materials · 38
PDF
Microstructure and Thermoelectric Properties of Bulk Cobalt Antimonide (CoSb3) Skutterudites Obtained by Pulse Plasma Sintering
2015 · M.J. Kruszewski, R. Zybała, et al. · Journal of Electronic Materials · 33
PDF
W/steel joint fabrication using the pulse plasma sintering (PPS) method
2011 · Marcin Rosiński, Mirosław J. Kruszewski, et al. · Fusion Engineering and Design · 30
Tailoring mechanical and surface properties of UFG CP-Ti by the low-temperature annealing
2022 · Agata Sotniczuk, Donata Kuczyńska-Zemła, et al. · Applied Surface Science · 21
PDF
High homogeneity and ultralow lattice thermal conductivity in Se/Te-doped skutterudites obtained by self-propagating high-temperature synthesis and pulse plasma sintering
2022 · M.J. Kruszewski, K. Cymerman, et al. · Journal of Alloys and Compounds · 21
Microstructure and thermoelectric properties of p and n type doped β-FeSi2 fabricated by mechanical alloying and pulse plasma sintering
2019 · Franciszek Dąbrowski, Łukasz Ciupiński, et al. · Materials Today Proceedings · 20
Review of rapid fabrication methods of skutterudite materials
2020 · M.J. Kruszewski, Ł. Ciupiński, et al. · Materials Today Proceedings · 19
PDF
Influence of DC and AC current in the SPS sintering process on homogeneity of thermoelectric properties of Cu2S and Cu2Se
2022 · Pawel Nieroda, Mirosław J. Kruszewski, et al. · Ceramics International · 17
Effect of different water-cement ratios on the durability of prefabricated concrete tanks exposed to acetic acid aggression
2023 · Joanna Witkowska-Dobrev, Olga Szlachetka, et al. · Journal of Building Engineering · 16
Microstructure and Thermoelectric Properties of Doped FeSi2 with Addition of B4C Nanoparticles
2021 · F. Dąbrowski, Ł. Ciupiński, et al. · Archives of Metallurgy and Materials · 16
PDF
In-depth analysis of the influence of bio-silica filler (Didymosphenia geminata frustules) on the properties of Mg matrix composites
2023 · Izabela B. Zgłobicka, Anna Dobkowska, et al. · Journal of Magnesium and Alloys · 12
Method and Apparatus for Determining Operational Parameters of Thermoelectric Modules
2016 · Rafał Zybała, Maksymilian Schmidt, et al. · Journal of Electronic Materials · 12
PDF
Thermoelectric Properties of Cu2S Doped with P, As, Sb and Bi—Theoretical and Experimental Studies
2024 · Paweł Nieroda, Juliusz Leszczyński, et al. · Materials · 11
A comparative study of oxidation behavior of Co4Sb12 and Co4Sb10.8Se0.6Te0.6 skutterudite thermoelectric materials fabricated via fast SHS-PPS route
2024 · M.J. Kruszewski, K. Cymerman, et al. · Journal of the European Ceramic Society · 10
Pulse plasma sintering of a tungsten/steel divertor module
2013 · Mirosław J. Kruszewski, Łukasz Ciupiński, et al. · Fusion Engineering and Design · 9
Skutterudite (CoSb3) thermoelectric nanomaterials fabricated by Pulse Plasma in Liquid
2018 · Rafał Zybała, Maksymilian Schmidt, et al. · Materials Today Proceedings · 8
Rapid fabrication of Se-modified skutterudites obtained via self-propagating high-temperature synthesis and pulse plasma sintering route
2022 · M.J. Kruszewski, M. Kot, et al. · Ceramics International · 7
Influence of Ag particle shape on mechanical and thermal properties of TIM joints
2022 · Marcin Myśliwiec, Ryszard Kisiel, et al. · Microelectronics International · 6
PDF
Characterization of nanostructured bulk cobalt triantimonide doped with tellurium and indium prepared by pulsed plasma in liquid method
2020 · R. Zybała, M. Schmidt, et al. · Bulletin of the Polish Academy of Sciences Technical Sciences · 6
PDF
Works count: 39
Citation count: 851
H-index: 16
I10-index: 20
Year
Topic
Type