Get started
Author

H.A. Visser

Observed names: H A Visser, H. A. Visser, Hendrikus (Roy) A. Visser, Hendrikus A. Visser, Hendrikus Antonius Visser, Hendrikus Visser, Roy (H. A.) Visser, Roy H. A. Visser, Visser, Hendrikus
ORCID: 0000-0001-6199-2806
Observed ORCID: 0000-0001-6199-2806
OpenAlex ID: A5083349545
The Road to Bring FDCA and PEF to the Market
2022 · Ed de Jong, Hendrikus (Roy) A. Visser, et al. · Polymers · 245
PDF
Optimization of the tape placement process parameters for carbon–PPS composites
2013 · W.J.B. Grouve, L.L. Warnet, et al. · Composites Part A Applied Science and Manufacturing · 118
Chain Structure and Molecular Weight Dependent Mechanics of Poly(ethylene 2,5-furandicarboxylate) Compared to Poly(ethylene terephthalate)
2018 · Jesper G. van Berkel, Nathanael Guigo, et al. · Macromolecules · 61
Strain induced crystallization in biobased Poly(ethylene 2,5-furandicarboxylate) (PEF); conditions for appearance and microstructure analysis
2018 · Charlotte Menager, Nathanael Guigo, et al. · Polymer · 44
Lifetime Assessment of Load‐Bearing Polymer Glasses: An Analytical Framework for Ductile Failure
2010 · Hendrikus A. Visser, Ton C. Bor, et al. · Macromolecular Materials and Engineering · 40
Melt-Spun Fibers from Bio-Based Polyester–Fiber Structure Development in High-Speed Melt Spinning of Poly(ethylene 2,5-furandicarboxylate) (PEF)
2021 · Wataru Takarada, Kenichi Sugimoto, et al. · Materials · 34
PDF
The Opportunities and Challenges of Biobased Packaging Solutions
2025 · Ed de Jong, Ingrid Goumans, et al. · Polymers · 28
PDF
Ultrasonic measurements of undamaged concrete layer thickness in a deteriorated concrete structure
2015 · A. Demčenko, H.A. Visser, et al. · NDT & E International · 27
PDF
Influence of physical aging on impact embrittlement of uPVC pipes
2011 · H A Visser, T C Bor, et al. · Plastics Rubber and Composites Macromolecular Engineering · 27
PDF
Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise
2015 · S. Agnelli, F. Baldi, et al. · Polymer Testing · 21
PDF
Lifetime Assessment of Load‐Bearing Polymer Glasses: The Influence of Physical Ageing
2010 · Hendrikus A. Visser, Ton C. Bor, et al. · Macromolecular Materials and Engineering · 21
PDF
Characterising the fracture toughness of polymers at moderately high rates of loading with the use of instrumented tensile impact testing
2012 · H.A. Visser, F. Caimmi, et al. · Engineering Fracture Mechanics · 14
PDF
Residual lifetime assessment of uPVC gas pipes
2009 · Hendrikus A. Visser · 10
PDF
Reliable Inkjet-Printed Interconnections on Foil-Type Li-Ion Batteries
2012 · N. B. Palacios-Aguilera, H. A. Visser, et al. · IEEE Transactions on Device and Materials Reliability · 7
The Influence of Small Amounts of the Biobased Polyester PEF on the Mechanical Recycling of PET
2026 · Roy H. A. Visser, Ele L. de Boer, et al. · Polymers · 5
PDF
Fire Propagation Behavior of Some Biobased Furanic Compounds with a Focus on the Polymer PEF
2022 · Anitha Muralidhara, Ed de Jong, et al. · ACS Omega · 5
Investigation of PVC physical ageing in field test specimens using ultrasonic and dielectric measurements
2012 · A. Demcenko, M. Ravanan, et al. · IEEE International Ultrasonics Symposium · 5
A comparative study of heating elements used for the development of textile heaters
2012 · I. Petcu, Piyush Agrawal, et al. · University of Twente Research Information · 3
PDF
An attempt to use scratch tests to predict the residual lifetime of unplasticised poly(vinyl chloride) pipes
2009 · H.A. Visser, L.L. Warnet, et al. · Engineering Fracture Mechanics · 3
Performance of inkjet-printed structures on different substrate materials under high humidity and elevated temperature conditions
2012 · N. B. Palacios-Aguilera, H. A. Visser, et al. · Electronic System-Integration Technology Conference (ESTC) · 2
Excellent impact performance of PVC pipeline materials in gas distribution networks after many years of service
2008 · H.A. Visser, R.M.J. Hermkens, et al. · University of Twente Research Information · 2
A Parametric Study on Compression Molding of Reference Parts with Integrated Features Using Carbon Composite Production Waste
2015 · Mohammed Iqbal Abdul Rasheed, Bert Rietman, et al. · Key engineering materials · 1
PDF
Low-Cost Technology for the Integration of Micro- and Nanochips into Fluidic Systems on Printed Circuit Board: Fabrication Challenges
2012 · N. B. Palacios-Aguilera, J. Bastemeijer, et al. · Research Repository (Delft University of Technology) · 1
PDF
Influence of the Level of Gelation on Physical Ageing Kinetics of uPVC Pipes
2012 · E. Drenth, T.C. Bor, et al. · University of Twente Research Information · 1
PDF
A new engineering approach to predict the long-term hydrostatic strength of unplasticized poly(vinyl chloride) pipes
2008 · H.A. Visser, M. Wolters, et al. · University of Twente Research Information · 1
Works count: 34
Citation count: 727
H-index: 12
I10-index: 13
Year
Topic
Type