The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate.
Year: 2010
Type: article
Abstract: Equipment has been developed to enable KrF excimer laser ablation\nmachining of a bisphenol A polycarbonate sample under closed thick\nfilm flowing liquid immersion. The liquid medium is easily changeable,\noffering the possibility of chemical modification of the material etching\nmechanism. Previous work using a medium of filtered tap water has proven\nthe ability of this equipment to control debris; however, this medium had\nthe simultaneous consequence of modifying the primary ablation characteristics\nfrom those achieved in ambient air. De-ionized (DI) water is a\nchemically similar medium that displays contrasting electrostatic properties\nand was used in this work with the intention of modifying the adhesion\nmechanisms active. Use of DI water resulted in close agreement of ablation\ncharacteristics observed using filtered tap water. Etch rate and threshold\ndisplayed a marginal loss in machining efficiency by magnitudes of 11.7%\nand 4.3% respectively when using DI water for immersion of laser ablation\ncompared to filtered water. This loss is proposed to be caused by increased\ncolloidal grouping of small debris particles to form medium sized items that\nmore completely attenuate the laser beam. As with filtered water, the etch\nefficiency was also found to be flow velocity dependent due to changing\nfluid flow-plume interaction states. The mode of debris control afforded by\nthe use of DI water as a laser ablation immersion medium was similar to\nthat of filtered water. But, the volume of debris deposited was significantly\ngreater and was deposited in closer proximity to the feature. Electrostatic\ninsulation by DI water allows greater attraction of particles to the surface\ndue to the suppression of Yukawa forces. Moreover, the action of colloidal\naggregation of particles caused DI water to deposit a proportionally\nlarge volume of medium sized debris when compared to the proportional\npopulation of medium sized debris deposited by filtered water. This work\ndemonstrates that choice of medium offers the immersed laser ablation user\ncontrol of ablation characteristics without modification of laser parameters.
Authors: Colin Dowding, J. Lawrence
Institution: Loughborough University
Language: English
Subfield: Industrial and Manufacturing Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W1581357636
